There is some minor maintenance. Because it's made out of wood, which can expand and contract, the bolts need tightening every few months or so. It's easy and takes only a couple of minutes. That, and putting in a fresh water purification tablet every six to twelve months, are about it for regular maintenance. The only problem I've had with the rower (the reason for 4 stars instead of 5) was a squeak that developed after about 6 weeks. It took me some time to determine the source of the squeak, which was a metal bracket connecting the footrest board to the horizontal boards above the drum. I had to partially disassemble the top section and tighten four bolts, but that fixed the problem and it's been quiet ever since.
The reason I'm writing now, two years after purchase, is, I broke one of the wheels. I proceeded to order the wrong replacement, so I emailed them pictures to ask for the right parts. They wrote back asking for the serial number to get the right unit AND to see if it was under warranty. (Hadn't even occurred to me.) Turns out it was, they're sending me the wheels, they're refunding me for the wrong part, AND included a link for the Puri-Tabs which I didn't know they provide for the life of the ROWER! They're also replacing all eight wheels even though there's only one broken one.
The WaterRower Oxbridge is hand crafted in solid Cherrywood. Like all woods, Cherrywood may vary in color from a red-brown to deep red. The wood will darken in color with exposure to light. For this reason all WaterRower Cherrywood components are kept in light free rooms to protect from shadowing. A new WaterRower Oxbridge will therefore appear quite light in color. The wood will however darken over time reaching a rich reddish hue. Each machine has been hand finished with three coats of Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Cherrywood, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.
Being able to easily store your rower is a huge plus. Make sure you investigate how well the machine stores, if it folds up or comes apart easily to be able to put it in your closet, or in other storage areas. As an example, the Concept2 Model D rowing machine folds up nicely by a simple pull pin located in the middle of the rower. Wheels on the bottom allow for easy moving.
Reviews.com has an advertising relationship with some of the offers included on this page. However, the rankings and listings of our reviews, tools and all other content are based on objective analysis. For more information, please check out our full Advertiser Disclosure. Reviews.com strives to keep its information accurate and up to date. The information in our reviews could be different from what you find when visiting a financial institution, service provider or a specific product’s website. All products are presented without warranty.
I am happy with this rowing machine..it is quiet and offers good resistence without puttong too much stress on my joints...HOWEVER...the electronic counter has NOT worked from day one!!!..pulling the handle does NOT activate the meter at all!...I hve pluged in the wires and repeated that process SEVERAL times..BUT...nothing!!...I can activate the meter manually...BUT...it is USELESS for registering any rowing activity!!..As I said...good rower....USELESS Eleconic meter!!!
Another negative point for me is the angle of the seat. Unlike the Concept2, it has a slight backward angle, which makes it easier to maintain good form at the end of the stroke. Given that the Waterrower has greater resistance at the catch, it puts more pressure on the lower back at this point making it uncomfortable for people like myself with lumbar spine problems.
This twenty minutes duration technique is designed to max your muscles out every interval, and at the same time the recovery periods assist in increasing the efficiency with the fat burning routine. Once you have prepared your rowing machine, set its resistance to four. Perform sets of ten, fifteen and twenty power strokes by pulling to handle towards the torso of your body, like doing a rowing motion. Do this motion as fast as your body permits you to. Separate your power strokes at sixty seconds, putting in only fifty percent the effort you did before this. Repeat this cycle until you have fully rowed for a total of twenty minutes.
The Concept2 Model D is the ultra-popular air rower that you’ll see at most gyms. It is one of the best home indoor rowers you can buy period. Expertly constructed and ergonomically unequaled, this rowing machine looks great and rows smoothly without so much as a jarring catch. As an air rower, the Concept2 employs air baffles to create the resistance. A nickel-plated chain pulls the flywheel and you get your workout by pulling against the increasingly higher air pressure that the fan is creating.
The WaterRower Classic is hand crafted in solid American Black Walnut. Like all woods, Black Walnut may vary in color from a rich brown to purple-black. Each machine has been hand finished with three coats of Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Black Walnut, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.
Yes! The mother of indoor rowing competitions is the CRASH-B Sprints, held annually in Boston. The Charles River All-Star Has-Beens started when the U.S. boycotted the Olympics in 1980 — during the same era that Concept 2 launched their Model A; necessity met opportunity. CRASH-B is still held with aplomb and doesn’t require any special qualification of its applicants.
Chris Kinsey works as an editor for a medical publisher and has experience dealing with many topics, ranging from athlete's foot to cancer and brain injury. Kinsey has a great deal of freelance experience writing for sports and parenting magazines as well. Kinsey holds a Bachelor of Arts in communications from California University of Pennsylvania.