After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
Con's: Super bummed that for $1160 they couldn't include an internal ANT+ transponder and Heart Rate strap(sub $100 package). The foot straps are crap! Within the first 1000m of moderate rowing they loosen to the point of being able to pull foot out on Recovery of stroke(Yes, even with ball of foot down). I really wish the WaterCoach F.I.T. software for the S4 Monitor was macOS compatible. It'd be nice to able to customer program workouts on my MacBook Pro or iMac.

The WaterRower Natural is hand crafted in solid Ash and stained Honey Oak for consistency of color. Each machine has been hand finished with Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use.
Water rowers are just a recent invention followed by the air rower, which utilizes paddles and water in order to create the resistance. While there are a lot of people who prefer the air rower compared to this one, there are also people who prefer the water rower because it has a smoother, quieter feel of the action, especially when emulating the movement of water rowing. Like the air rower, this machine is able to burn calories and work up your muscles through offering resistance to your movement while sitting on the sliding seat. The more resistance there is, the more it makes it harder to work on the machine and your workout becomes more challenging.
On a rowing machine, you don’t want to be wearing clothes that are too baggy as the fabric can get caught between the seat and the beam it slides on.  It’s not a disaster if that happens, but it can get annoying if your shorts keep getting caught there while you’re trying to get a serious workout.   It’s better to wear shorter, tighter-fitting shorts (nothing ridiculous), but just enough to ensure it doesn’t the material doesn’t hang down.
The WaterRower Natural is hand crafted in solid Ash and stained Honey Oak for consistency of color. Each machine has been hand finished with Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use.
The rowing machine itself is unlike any other on the market with its patented water filled flywheel. It is hard to exactly copy the action of a scull on the water, but the mechanics of the flywheel spinning in water comes in a close second on dry land. The fact that the water is 800 times denser than air means that there is no need for any extra resistance or dampening that you will find in normal air rowers. The faster you pull, the more resistance is generated giving it infinite variability. However, if you want to be able to practice rowing with a faster stroke, you will have to reduce the amount of water in the tank unlike an air rower where you just have to adjust the baffle.
The WaterRower Classic is hand crafted in solid American Black Walnut. Like all woods, Black Walnut may vary in color from a rich brown to purple-black. Each machine has been hand finished with three coats of Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Black Walnut, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.
Other details include dual rails with four corner wheels that increase seat stability and reduce the amount of sweat buildup; a frame that flips upright for handy storage; and a weight capacity of up to 1,000 pounds. The WaterRower Classic measures 84 by 21 by 22 inches (W x H x D), weighs 117 pounds (with water), and carries a one-year warranty on the frame and components (WaterRower will upgrade the warranty to five years on the frame and three years on the components with the completion of a registration form).
Row, Jimmy, row…🎶 What’s one of the best things about using the WaterRower? There’s no such thing as an age limit when it comes to using it because of its ability to provide a workout with minimal impact on the joints. You don’t have to take our word for it, but we think you might want to take this fellas. Jimmy is 93 years young and hopped on the WaterRower for the first time yesterday. Let’s hear it for Jimmy!
The frame is beyond durable and is designed for absorbing sound and vibration. There’s no creaking or other sounds that you might expect from wood components. It has a low center of gravity that keeps the rower in place while exerting full rowing power. The polycarbonate water tank is equally durable and practically indestructible. The Classic Rower doesn’t have any moving parts that can wear out, or belts and pulleys that need to be maintained.
The overall rowing experience encompasses pulley, seat, and — of course — resistance. Air and water have very distinct qualities, making them impossible to compare but interesting to contrast. Air stores inertia, which feeds into intense, constant effort during a goal-oriented workout. Water’s more sluggish drag makes for demanding exercise, but one that’s less consistent.
Of the four types of rowing machines or ergometers, water rowers are best at reproducing the sensation of on-water rowing. Their stroke cycles hold true to the dynamics of real paddling, and each stroke is punctuated with a splash! Water rowers have sliding seats to allow full-body cardiovascular workouts. (With cheaper rowing machines, in contrast, the seats don’t move.) These fitness machines tend to feature high quality parts and can last a lifetime.
There is some minor maintenance. Because it's made out of wood, which can expand and contract, the bolts need tightening every few months or so. It's easy and takes only a couple of minutes. That, and putting in a fresh water purification tablet every six to twelve months, are about it for regular maintenance. The only problem I've had with the rower (the reason for 4 stars instead of 5) was a squeak that developed after about 6 weeks. It took me some time to determine the source of the squeak, which was a metal bracket connecting the footrest board to the horizontal boards above the drum. I had to partially disassemble the top section and tighten four bolts, but that fixed the problem and it's been quiet ever since.
×