On theme with C2’s interchangeability, models D or E are essentially the same machine. When we talk about one we’re talking about both. The Concept 2 E is just 8 pounds heavier but is made out of stronger stuff all around — what’s plastic on the model D is aluminium on the model E, and what’s aluminum on the model D is welded steel on the model E. The only noticeable variations are seat height and display position.
After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
In the rowing machine category, there are a lot of models to chose from. They range in price from under $100 to well over $1500. As you can imagine, you’re getting a different type of row machine at those ends of the spectrum, but within that variety there’s something for everyone. To help guide you, we’ve listed our favorite row machine models and brands by price below:
Award Winning Design - The WaterRower has been designed to set it apart from other fitness equipment, featuring an attention to detail unseen in other exercise equipment. Refined Design - The WaterRower has been designed to set it apart from other fitness equipment, featuring an attention to design refinement unseen in other exercise equipment. Hand Crafting - WaterRower’s wooden models are handcrafted from a selection of the world’s finest hard woods (Ash, Cherry, Walnut, Beech and Oak).. Each model is hand finished and coated with Danish oil giving it a deep penetrating Luster. Sustainable & Eco-Friendly - All WaterRower's wooden models are crafted from the finest Appalachian hardwoods sourced only from replenishable forests.
There is much to love about the WaterRower--and I do love it--but I would echo others' comments that although the seat rolls solidly and smoothly on the wood rails, the seat itself is very hard (I use a gel seat pad I bought for my hard fiberglass kayak seat), and the footpads are in need up rethinking and upgrading--the cheap plastic doesn't let you row in socks or barefoot and is not really worthy of a machine that is otherwise a stunning piece of engineering and a beautiful one as well. As one other person noted about his machine, my machine made a clicking noise on the return stroke, so I had to adjust the wheel underneath the top rail that connects to the footpad and pull it away gently from where it was rubbing against another component. Also, be warned: the instruction booklet is in the DVD case. I did not see the little sticker on the case telling me that, thinking I'd wait to watch the DVD until after I'd assembled it. But WaterRower has a copy of the assembly instructions on their website, along with a video (I found the written ones better and easier to follow), so I was able to assemble it with no difficulty.
Being able to easily store your rower is a huge plus. Make sure you investigate how well the machine stores, if it folds up or comes apart easily to be able to put it in your closet, or in other storage areas. As an example, the Concept2 Model D rowing machine folds up nicely by a simple pull pin located in the middle of the rower. Wheels on the bottom allow for easy moving.
The model E’s seat stands 6 inches higher. And while the model D’s monitor rests on an adjustable arm, the E’s sits on unbending metal. These few technical differences do nothing to impact ride feel. We recommend the $200-cheaper model D as the best buy, but the Concept 2 E will appeal to anyone who values a higher seat and more solid construction.
The Concept2 Model D Indoor Rowing Machine includes the excellent PM5 monitor that provides all vital data. It can display your workout performance in two ways. You can choose to see your workout in total distance and time, or as “splits”. Splits is a way of seeing how your pace is varying along two set points. Either way is useful, but splits give you more of a “real-time”, in the moment calculation of how you are doing.
The reason I'm writing now, two years after purchase, is, I broke one of the wheels. I proceeded to order the wrong replacement, so I emailed them pictures to ask for the right parts. They wrote back asking for the serial number to get the right unit AND to see if it was under warranty. (Hadn't even occurred to me.) Turns out it was, they're sending me the wheels, they're refunding me for the wrong part, AND included a link for the Puri-Tabs which I didn't know they provide for the life of the ROWER! They're also replacing all eight wheels even though there's only one broken one.
As with any fitness activity, it’s important to exercise with proper technique, however. The big muscles in the legs are where most of the workout action should be. Injury to the lower back can occur from bending too far forward in the row. It’s best to maintain a upright 90 degree angle to the rowing machine’s seat and slider bar. Using the legs for the motion rather than relying as heavily on the back or arms can help reduce the chance of muscle pulls or other related injuries. Always check with a physician before starting any new fitness regimen.
The WaterRower Natural is outfitted with a Series 4 performance monitor that's designed to balance technical sophistication with user-friendliness. The monitor--which includes six information and programming windows, six QuickSelection buttons, and three navigation buttons--displays your workout intensity, stroke rate, heart rate, zone bar, duration, and distance. Plus, the monitor is compatible with an optional heart rate chest strap and receiver, which helps you optimize your workout and achieve your exercise objectives.