The rowing machine itself is unlike any other on the market with its patented water filled flywheel. It is hard to exactly copy the action of a scull on the water, but the mechanics of the flywheel spinning in water comes in a close second on dry land. The fact that the water is 800 times denser than air means that there is no need for any extra resistance or dampening that you will find in normal air rowers. The faster you pull, the more resistance is generated giving it infinite variability. However, if you want to be able to practice rowing with a faster stroke, you will have to reduce the amount of water in the tank unlike an air rower where you just have to adjust the baffle.
The dense resistance of water creates substantial drag, but on the WaterRower models, this is perfectly tempered by a whippy cord. It coils and recoils with such steady speed that one tester noted how the Classic “eats the rope back up on recovery.” This smooth agility helps balance out the impact of encountering slow water at the start of every stroke.
This elegant rowing machine builds strength and stamina by closely simulating a real world rowing experience. Its patented Waterflywheel, which moves through actual water, provides a smooth stroke that exercises 84% of your muscle mass evenly and prevents injuries. When not in use, the WaterRower can be stored vertically against a wall. Made in the USA from ethically sourced walnut wood. Assembly required.

One downside of the Waterrower for me are the footrests. Whilst they are perfectly adequate if you want to row in shoes, rowing barefoot, which is something I like to do, is impossible. The plastic is completely square at the bottom and has sharp edges that cut into your heels. I also found that my shoes get caught when trying to put them in and out of the holders, which is a bit irritating.


In the rowing machine category, there are a lot of models to chose from. They range in price from under $100 to well over $1500.  As you can imagine, you’re getting a different type of row machine at those ends of the spectrum, but within that variety there’s something for everyone.  To help guide you, we’ve listed our favorite row machine models and brands by price below:

One downside of the Waterrower for me are the footrests. Whilst they are perfectly adequate if you want to row in shoes, rowing barefoot, which is something I like to do, is impossible. The plastic is completely square at the bottom and has sharp edges that cut into your heels. I also found that my shoes get caught when trying to put them in and out of the holders, which is a bit irritating.
Most of the Waterrower range is made of wood harvested from the sustainably managed Appalachian forests of the eastern United States. The machines are extremely well built and are beautiful to look at coming in Ash, Oak or Cherry wood. If you are concerned about having an exercise machine in a living area, then one of the wooden models will fit right in to your living room. They are also extremely quiet in operation due to the wooden construction and the use of a strap rather that a chain. The only thing you can really hear is the swishing sound of the water in the tank as you pull giving you the feeling that you are really on the river!

Instead of air or hydraulic resistance, the Elite Wave Water Rowing Machine emulates actual rowing with lifelike water resistance. The paddles glide through the water housed in the reservoir, making the rowing stroke smooth from start to finish, and like rowing on a body of water, the resistance increases infinitely the faster you row. Not only does this feel like rowing on water, it sounds like water. Different stroke speeds and intensities vary water motion, resulting in realistic water resonance.
The WaterRower US office got in on the Pull for a Cure fundraising action and all pulled together to raise money for breast cancer! - - - - As many of you may already know, throughout the month of October, WaterRower has been raising money through our Pull for a Cure fundraiser. For each 500m workout rowed and posted online, we'll be donating $1 towards breast cancer research! Don't forget to get your workouts in before Monday, October 31st! #PullForaCure #WaterRower
The Classic Rowing Machine is generally quiet for a water resistance machine, but some users believed that it was a little noisy. Like all rowers, whether it’s a flywheel or a waterwheel, there is going to be noise. The more effort that you put into it, the louder it’s going to get. And most find it motivating to hear the water paddles get louder as they burn more calories.

As far as “racing”, I said an air rowing machine is better because the Concept2 is the only model used for indoor rowing competitions, setting world records, and entering your actual scores online. It is because their monitor can calculate the drag factor of the flywheel in real time and accurately calculate distance and time. Small changes such as dust build up, air temperature, and humidity will not change the times between different machines because the drag factor is calculated every stroke.
On a rowing machine, you don’t want to be wearing clothes that are too baggy as the fabric can get caught between the seat and the beam it slides on.  It’s not a disaster if that happens, but it can get annoying if your shorts keep getting caught there while you’re trying to get a serious workout.   It’s better to wear shorter, tighter-fitting shorts (nothing ridiculous), but just enough to ensure it doesn’t the material doesn’t hang down.

The Concept2 Model D is the ultra-popular air rower that you’ll see at most gyms. It is one of the best home indoor rowers you can buy period. Expertly constructed and ergonomically unequaled, this rowing machine looks great and rows smoothly without so much as a jarring catch. As an air rower, the Concept2 employs air baffles to create the resistance. A nickel-plated chain pulls the flywheel and you get your workout by pulling against the increasingly higher air pressure that the fan is creating.
The Water Rower comes partly preassembled in two large boxes. The assembly instructions are reasonably good, and as long as you take your time and follow them carefully (read all the text) it takes about 45 minutes from opening the first box to trying it out. I bought bottles of distilled water to fill it, which made it easy to fill using the included funnel & hose.
×