John Duke, creator of the WaterRower, was inspired to try his hand at invention while working at a subsidiary for U.S. Steel. He wanted to make an indoor machine that felt as much like real rowing as possible, with a focus on aesthetics. It took him two years to get the design right, moving past failed ideas such as a flipper in the tank instead of a clutch. What began as a series of doodles at his desk turned into a sculptural piece of exercise equipment that upends expectations in two ways: by bringing water indoors, and by looking elegant and artful when stored.


After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
Most of the Waterrower range is made of wood harvested from the sustainably managed Appalachian forests of the eastern United States. The machines are extremely well built and are beautiful to look at coming in Ash, Oak or Cherry wood. If you are concerned about having an exercise machine in a living area, then one of the wooden models will fit right in to your living room. They are also extremely quiet in operation due to the wooden construction and the use of a strap rather that a chain. The only thing you can really hear is the swishing sound of the water in the tank as you pull giving you the feeling that you are really on the river!
The resistance of your rowing machine impacts how it moves. Select from hydraulic and magnetic rowing resistance. Hydraulic rowers are typically more compact in size, while magnetic machines make little noise as they operate. Details like easy-to-reach tension knobs or buttons allow you to increase or decrease the intensity of your resistance as you train.

Meticulous care is taken in the creation of each rowing machine, ensures the WaterRower ethos of elegant design and American craftsmanship is evident whether in use or in storage. The soothing sound of our patented water resistance is both blissful and motivational. Creature-comforts can be found throughout, from the ergonomic handle, remarkably comfortable seat cushion and user-friendly performance monitor, you will find yourself searching out reasons to "sneak in" an added WaterRower workout into your day. When finished, the WaterRower stores with ease, while blending seamlessly into any environment, ensuring your design and décor values are never compromised by your fitness lifestyle.


HIIT (High Intensity Interval Training) is a great style of training to burn fat, build toned muscle, and improve cardiovascular systems as the same time. Challenging HIIT workouts help you get to that state of EPOC and take advantage of the after-burn effect. The ability to change the resistance of the rowing machine at will means that the equipment is ideal for this method of exercise.
Function plays a large role in defining good design. When designers look at an object, they don't just consider its aesthetic appearance; they should also challenge it to be more versatile, to respond to the user's need, or to achieve its purpose more elegantly. Good design has the capacity to solve problems that sometimes we didn't even know we had. This is one of the ways design touches and enriches our everyday life.

Award Winning Design - The WaterRower has been designed to set it apart from other fitness equipment, featuring an attention to detail unseen in other exercise equipment. Refined Design - The WaterRower has been designed to set it apart from other fitness equipment, featuring an attention to design refinement unseen in other exercise equipment. Hand Crafting - WaterRower’s wooden models are handcrafted from a selection of the world’s finest hard woods (Ash, Cherry, Walnut, Beech and Oak).. Each model is hand finished and coated with Danish oil giving it a deep penetrating Luster. Sustainable & Eco-Friendly - All WaterRower's wooden models are crafted from the finest Appalachian hardwoods sourced only from replenishable forests.

The reason I'm writing now, two years after purchase, is, I broke one of the wheels. I proceeded to order the wrong replacement, so I emailed them pictures to ask for the right parts. They wrote back asking for the serial number to get the right unit AND to see if it was under warranty. (Hadn't even occurred to me.) Turns out it was, they're sending me the wheels, they're refunding me for the wrong part, AND included a link for the Puri-Tabs which I didn't know they provide for the life of the ROWER! They're also replacing all eight wheels even though there's only one broken one.


Unlike its WaterRower Natural cousin, the WaterRower Club is designed for high-traffic areas, such as commercial gyms, studios, and rehabilitation clinics. Its dual black rails have been styled to prevent scuffing, while the other wood components are finished in an attractive rosewood, which is more resistant to soiling than the Natural model. Other details include four corner wheels on the rails that increase seat stability and reduce the amount of sweat buildup; a frame that flips upright for handy storage; and a weight capacity of up to 1,000 pounds. The WaterRower Club measures 84 by 21 by 22 inches (W x H x D), weighs 117 pounds (with water), and carries a one-year warranty on the frame and components (WaterRower will upgrade the warranty to five years on the frame and three years on the components with the completion of a registration form).


This piece of finely tuned, hand-crafted, water-resistance workout equipment also sits at the top end of the rowing machine spectrum. Employing a water flywheel that helps to mimic the feel of rowing in actual water, the natural wood WaterRower Rowing Machine will bring you a smooth, yet challenging workout that is as tough as you want it to be. If rowing is one of the best exercises you can do for your body as far as natural motion with low to no-impact, then the WaterRower is one of the best machines to do it on.
The water flywheel is comprised of two paddles encased in an enclosed tank of water. As you pull the cable, the paddles move through the water creating resistance. The beauty of this machine is it uses the mass/density of water. The paddles create the drag, so the harder you pull, the more resistance increases. Think about moving your hands through water. The faster you go, the more dense water feels. The slower you go, the less you feel the resistance. And this type of resistance is excellent for your joints. Click here to read the full review.
The Verified Sustainable Hardwoods used for the WaterRower are sourced from the Appalachian Mountain region of the eastern United States, where planting rates exceed harvest rates by an average multiple of 2.29. The Appalachian Hardwood Timber resource includes more than 65.4 million acres in the eastern United States and provides the world with a bounty of the finest hardwood species.
Unlike its WaterRower Natural cousin, the WaterRower Club is designed for high-traffic areas, such as commercial gyms, studios, and rehabilitation clinics. Its dual black rails have been styled to prevent scuffing, while the other wood components are finished in an attractive rosewood, which is more resistant to soiling than the Natural model. Other details include four corner wheels on the rails that increase seat stability and reduce the amount of sweat buildup; a frame that flips upright for handy storage; and a weight capacity of up to 1,000 pounds. The WaterRower Club measures 84 by 21 by 22 inches (W x H x D), weighs 117 pounds (with water), and carries a one-year warranty on the frame and components (WaterRower will upgrade the warranty to five years on the frame and three years on the components with the completion of a registration form).

There are 4 main rowing machine types that are classed according to its utilized resistance mechanism. Having an exercise workout needs to have resistance against the movement in order to provide to the muscles and the cardiovascular system a good change. This can be provided by the rowing machine whenever you pull its handle and then slide back to the seat. Having low resistance works on the cardiovascular system can make you row fast easily. Having high resistance means that it provides you with the anaerobic session, working with the muscles harder, also having a slow stroke rate because of the harder pull.
 The amount of water in the tank simulates the weight of the boat and crew, the more water in the tank the heavier the boat and crew. The standard Calibration Level is Level 17. If the user is lighter in weight, Level 15-16 can be used. If the user is heavier in weight, level 18-19 can be used. The maximum level to fill the tank is Level 19. DO NOT fill above the maximum level – this could void the warranty.
The WaterRower Natural is hand crafted in solid Ash and stained Honey Oak for consistency of color. Each machine has been hand finished with Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use.
Copyright © 2018 Leaf Group Ltd. Use of this web site constitutes acceptance of the LIVESTRONG.COM Terms of Use, Privacy Policy and Copyright Policy. The material appearing on LIVESTRONG.COM is for educational use only. It should not be used as a substitute for professional medical advice, diagnosis or treatment. LIVESTRONG is a registered trademark of the LIVESTRONG Foundation. The LIVESTRONG Foundation and LIVESTRONG.COM do not endorse any of the products or services that are advertised on the web site. Moreover, we do not select every advertiser or advertisement that appears on the web site-many of the advertisements are served by third party advertising companies.
In the rowing machine category, there are a lot of models to chose from. They range in price from under $100 to well over $1500.  As you can imagine, you’re getting a different type of row machine at those ends of the spectrum, but within that variety there’s something for everyone.  To help guide you, we’ve listed our favorite row machine models and brands by price below:
In addition to its natural, fluid resistance, the Elite Wave Water Rowing Machine features many performance upgrades that push you to row harder, faster and longer. When mounting the rower, you will immediately notice the ease and customization of the footplates and straps. The footplates, which accommodate a wide range of foot sizes with their adjustable length, feature a heel strap that secures the feet while also allowing the heel to rise higher for a wider range of motion. There are also quick-adjust straps with finger loops so you can quickly secure your feet – even in the middle of the workout. Once you push, extend and bend, the seat glides atop the aluminum rowing beam, providing a smoother workout.

Of the four types of rowing machines or ergometers, water rowers are best at reproducing the sensation of on-water rowing. Their stroke cycles hold true to the dynamics of real paddling, and each stroke is punctuated with a splash! Water rowers have sliding seats to allow full-body cardiovascular workouts. (With cheaper rowing machines, in contrast, the seats don’t move.) These fitness machines tend to feature high quality parts and can last a lifetime.
When feet are in position and you are seated, ensure you are sitting in a tall yet relaxed position. Try to feel as if you are sitting on your ‘sit’ or ischia bones and rock slightly forwards and backwards on these bones. Your body weight will move from the front to the back of the seat. Ensure you are sitting with a locked core, shoulders relaxed and head looking forwards.
On theme with C2’s interchangeability, models D or E are essentially the same machine. When we talk about one we’re talking about both. The Concept 2 E is just 8 pounds heavier but is made out of stronger stuff all around — what’s plastic on the model D is aluminium on the model E, and what’s aluminum on the model D is welded steel on the model E. The only noticeable variations are seat height and display position.
The WaterRower Club is outfitted with a Series 4 performance monitor that's designed to balance technical sophistication with user-friendliness. The monitor--which includes six information and programming windows, six QuickSelection buttons, and three navigation buttons--displays your workout intensity, stroke rate, heart rate, zone bar, duration, and distance. Plus, the monitor is compatible with an optional heart rate chest strap and receiver, which helps you optimize your workout and achieve your exercise objectives.
After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
×