The Classic Rowing Machine is designed is extremely easy to use. Additionally, it has a lot of comfort features in its design. It has an ergonomically shaped handle and padded heel rests that accommodate nearly everyone. Everything on the machine can be adjusted quickly. Because there are no movement parts, maintenance is minimal. Even the computer has a lot of one button operations, so the minute you have the rower assembled, you can get to work.
Essentially, the water rower uses water as it's resistance and the air rower (click here to read our air rowing machine reviews) uses air resistance. Additionally, the resistance of the water gives a very similar feeling to actually rowing in the water. The rowing machines listed above all have fantastic rowing mechanisms that mimic the exact feeling of a rowing a boat.

The frame is beyond durable and is designed for absorbing sound and vibration. There’s no creaking or other sounds that you might expect from wood components. It has a low center of gravity that keeps the rower in place while exerting full rowing power. The polycarbonate water tank is equally durable and practically indestructible. The Classic Rower doesn’t have any moving parts that can wear out, or belts and pulleys that need to be maintained.
After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
Essentially, the water rower uses water as it's resistance and the air rower (click here to read our air rowing machine reviews) uses air resistance. Additionally, the resistance of the water gives a very similar feeling to actually rowing in the water. The rowing machines listed above all have fantastic rowing mechanisms that mimic the exact feeling of a rowing a boat.
One downside of the Waterrower for me are the footrests. Whilst they are perfectly adequate if you want to row in shoes, rowing barefoot, which is something I like to do, is impossible. The plastic is completely square at the bottom and has sharp edges that cut into your heels. I also found that my shoes get caught when trying to put them in and out of the holders, which is a bit irritating.
In the rowing machine category, there are a lot of models to chose from. They range in price from under $100 to well over $1500.  As you can imagine, you’re getting a different type of row machine at those ends of the spectrum, but within that variety there’s something for everyone.  To help guide you, we’ve listed our favorite row machine models and brands by price below:
I am happy with this rowing machine..it is quiet and offers good resistence without puttong too much stress on my joints...HOWEVER...the electronic counter has NOT worked from day one!!!..pulling the handle does NOT activate the meter at all!...I hve pluged in the wires and repeated that process SEVERAL times..BUT...nothing!!...I can activate the meter manually...BUT...it is USELESS for registering any rowing activity!!..As I said...good rower....USELESS Eleconic meter!!!

The WaterRower Natural rowing machine is handcrafted in solid ash wood, stained Honey Oak, and finished with Danish oil. Wood is an excellent material for this application due to its ability to absorb sound and vibration enhancing the WaterRower's smooth, quiet operation. The Natural, as with all WaterRowers, features patented WaterFlywheel technology, unrivaled in its replication of the resistance felt in on the water rowing.
If the machine is to be housed on a wooden floor you will need a mat beneath to reduce vibration and also noise. If space is tight, the hydraulic options are usually the smallest. It's also worth checking your floor can take the weight if you're going for one of the bigger, heavier models. For most, this shouldn't be a problem, if you have any doubts get a surveyor to check as it could be a very expensive mistake!

Award Winning Design - The WaterRower has been designed to set it apart from other fitness equipment, featuring an attention to detail unseen in other exercise equipment. Refined Design - The WaterRower has been designed to set it apart from other fitness equipment, featuring an attention to design refinement unseen in other exercise equipment. Hand Crafting - WaterRower’s wooden models are handcrafted from a selection of the world’s finest hard woods (Ash, Cherry, Walnut, Beech and Oak).. Each model is hand finished and coated with Danish oil giving it a deep penetrating Luster. Sustainable & Eco-Friendly - All WaterRower's wooden models are crafted from the finest Appalachian hardwoods sourced only from replenishable forests.

The frame is beyond durable and is designed for absorbing sound and vibration. There’s no creaking or other sounds that you might expect from wood components. It has a low center of gravity that keeps the rower in place while exerting full rowing power. The polycarbonate water tank is equally durable and practically indestructible. The Classic Rower doesn’t have any moving parts that can wear out, or belts and pulleys that need to be maintained.


This popular rowing machine utilizes magnetic resistance for a quiet, and very smooth workout. The Velocity Exercise CHR-2001 also features a programmable computer with 12 programs that will keep your exercising varied and challenging for years. The computer also provides data on distance, time, calories burned, pulse rate, strokes per minute, and stroke count. Additionally, the tension resistance is electronically controlled via the computer.  This electronic resistance control feature puts the CHR-2001 ahead of other magnetic rowers that tend to use knobs.

If you are accustomed to the natural catch and feel of on-water rowing, your rowing technique will immediately appreciate the Apollo’s unrivalled emulation of a boat gliding through water. FDF’s patented twin tank design generates a smooth uniform stroke, including no lag of resistance at the catch and continued resistance all the way to the finish.
The WaterRower Classic is hand crafted in solid American Black Walnut. Like all woods, Black Walnut may vary in color from a rich brown to purple-black. Each machine has been hand finished with three coats of Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Black Walnut, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.
Most of the Waterrower range is made of wood harvested from the sustainably managed Appalachian forests of the eastern United States. The machines are extremely well built and are beautiful to look at coming in Ash, Oak or Cherry wood. If you are concerned about having an exercise machine in a living area, then one of the wooden models will fit right in to your living room. They are also extremely quiet in operation due to the wooden construction and the use of a strap rather that a chain. The only thing you can really hear is the swishing sound of the water in the tank as you pull giving you the feeling that you are really on the river!
The WaterRower Natural is outfitted with a Series 4 performance monitor that's designed to balance technical sophistication with user-friendliness. The monitor--which includes six information and programming windows, six QuickSelection buttons, and three navigation buttons--displays your workout intensity, stroke rate, heart rate, zone bar, duration, and distance. Plus, the monitor is compatible with an optional heart rate chest strap and receiver, which helps you optimize your workout and achieve your exercise objectives.
×