On a rowing machine, you don’t want to be wearing clothes that are too baggy as the fabric can get caught between the seat and the beam it slides on.  It’s not a disaster if that happens, but it can get annoying if your shorts keep getting caught there while you’re trying to get a serious workout.   It’s better to wear shorter, tighter-fitting shorts (nothing ridiculous), but just enough to ensure it doesn’t the material doesn’t hang down.

There is much to love about the WaterRower--and I do love it--but I would echo others' comments that although the seat rolls solidly and smoothly on the wood rails, the seat itself is very hard (I use a gel seat pad I bought for my hard fiberglass kayak seat), and the footpads are in need up rethinking and upgrading--the cheap plastic doesn't let you row in socks or barefoot and is not really worthy of a machine that is otherwise a stunning piece of engineering and a beautiful one as well. As one other person noted about his machine, my machine made a clicking noise on the return stroke, so I had to adjust the wheel underneath the top rail that connects to the footpad and pull it away gently from where it was rubbing against another component. Also, be warned: the instruction booklet is in the DVD case. I did not see the little sticker on the case telling me that, thinking I'd wait to watch the DVD until after I'd assembled it. But WaterRower has a copy of the assembly instructions on their website, along with a video (I found the written ones better and easier to follow), so I was able to assemble it with no difficulty.
As with any fitness activity, it’s important to exercise with proper technique, however. The big muscles in the legs are where most of the workout action should be. Injury to the lower back can occur from bending too far forward in the row. It’s best to maintain a upright 90 degree angle to the rowing machine’s seat and slider bar. Using the legs for the motion rather than relying as heavily on the back or arms can help reduce the chance of muscle pulls or other related injuries. Always check with a physician before starting any new fitness regimen.
Products listed as Out of Stock are currently not in stock at the store(s) being viewed. Note that in some instances, very limited inventory may be available in stores, but because of small quantities we are unable to reflect the availability online. Please remember to check back – if or when inventory is replenished and available, this will be reflected online.
The advantages with air rowers is that there is smooth action; there is only small wear and tear to its mechanism; its automatic feature adjusts according to your rate of strokes; and there is a wide range of the resistance readily available in replicating the feel of rowing through the waters. The only disadvantage of this machine is that it tends to be noise indoors.
The WaterRower Club is handcrafted in solid ash and stained for color. The wood was chosen due to its marvelous engineering properties, especially its ability to absorb sound and vibration, which enhances the WaterRower's quiet performance and smooth operation. Ash, like all woods used in the construction of the WaterRower, is a premium hardwood with incredible longevity and dimensional stability. In addition, the wood is harvested from replenishable forests and is hand finished with Danish oil and urethane for protection.
Because of the vast array of products that might contain one of the chemicals or ingredients on the list, we must include Proposition 65 warnings in our communications with you. We are required to use exact wording as specified by the state of California. While the warning sounds alarming, the purpose is to notify you of the potential risk so that you can make an informed buying decision.
John Duke, creator of the WaterRower, was inspired to try his hand at invention while working at a subsidiary for U.S. Steel. He wanted to make an indoor machine that felt as much like real rowing as possible, with a focus on aesthetics. It took him two years to get the design right, moving past failed ideas such as a flipper in the tank instead of a clutch. What began as a series of doodles at his desk turned into a sculptural piece of exercise equipment that upends expectations in two ways: by bringing water indoors, and by looking elegant and artful when stored.

Although some rowing machines are made of space-age, super-sweat-resistant metals, you still want to wipe off the equipment after a sweaty workout.  These machines are usually constructed with a lot of various materials and salty sweat can be very corrosive.  Keeping your rowing machine clean can go a long way toward extending its life, and its appearance.
This twenty minutes duration technique is designed to max your muscles out every interval, and at the same time the recovery periods assist in increasing the efficiency with the fat burning routine. Once you have prepared your rowing machine, set its resistance to four. Perform sets of ten, fifteen and twenty power strokes by pulling to handle towards the torso of your body, like doing a rowing motion. Do this motion as fast as your body permits you to. Separate your power strokes at sixty seconds, putting in only fifty percent the effort you did before this. Repeat this cycle until you have fully rowed for a total of twenty minutes.
 Bring the unparalleled full-body workout of on-the-water rowing home with the premium design and feel of the XTERRA Fitness ERG600W Water Rower. The full body rhythmic nature of rowing makes it wonderfully efficient at burning calories while also developing flexibility and strength. Plus, the "zen-like" water movement you hear from the ERG600W multi-bladed impeller can be soothing and meditative. The large and easy to read 5.5" LCD console with height and angle adjustment includes motivating programmable modes to keep you involved, inspired, and reaching your goals.
Noise level is another large factor that tips the scale more towards water rowers. Air rowers make a fairly loud “whooshing” noise every stroke, which makes them bad for people who like watching TV, have sleeping children, live in apartments, or like working out early in the AM. Water rowers do make some noise but the splashing of water in the tank is a lot quieter and more soothing than the fan noise produced by air rowers.
Outside of resistance type, we found the number-one arbiter of ride feel to be cord quality. Water ergometers tend to employ nylon cords, while air ergometers feature metal chains — a durability factor we anticipated would result in our favoring air. But while all three water rowers aced our expectation of smooth, high-tension strokes, perfecting the chain seems to be more difficult: Some tug with just a slight rumble, others feature bouncy, grinding chains that are incredibly loud, something akin to angry snoring. As for nylon, the best wind and unwind like elastic silk — no slack, no sound, no catching, just perfectly even tension throughout the stroke.
This is a company known for quality as well as stewardship for over 20 years. WaterRower hand-crafts their rowing machines to be more than just a workout machine, but also a work of art as well. Also, WaterRower is and has been on the cutting edge of environmental sustainability with their use of the best hardwoods coming from renewable forests. We’re in excellent hands here.

The WaterRower Oxbridge is hand crafted in solid Cherrywood. Like all woods, Cherrywood may vary in color from a red-brown to deep red. The wood will darken in color with exposure to light. For this reason all WaterRower Cherrywood components are kept in light free rooms to protect from shadowing. A new WaterRower Oxbridge will therefore appear quite light in color. The wood will however darken over time reaching a rich reddish hue. Each machine has been hand finished with three coats of Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Cherrywood, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.


The WaterRower Classic is handcrafted from solid American Black Walnut wood, finished with danish oil. The WaterRower's patented WaterFlywheel has been specifically designed to emulate the dynamics of a boat moving though water and is unsurpassed in its simulation of the physical and physiological benefits of rowing. WaterRower will not provide support or documentation for any product transported outside of the original country of purchase
×