Because of the vast array of products that might contain one of the chemicals or ingredients on the list, we must include Proposition 65 warnings in our communications with you. We are required to use exact wording as specified by the state of California. While the warning sounds alarming, the purpose is to notify you of the potential risk so that you can make an informed buying decision.
Other details include dual rails with four corner wheels that increase seat stability and reduce the amount of sweat buildup; a frame that flips upright for handy storage; and a weight capacity of up to 1,000 pounds. The WaterRower Natural measures 84 by 21 by 22 inches (W x H x D), weighs 117 pounds (with water), and carries a one-year warranty on the frame and components (WaterRower will upgrade the warranty to five years on the frame and three years on the components with the completion of a registration form).
It's been nearly 30 years since John Duke, a former Yale University and USA National Team oarsman, set up a small shop in Rhode Island, USA to begin fine-tuning his innovative water-resistant rowing machine. With its beautiful design and unmatched feel, the WaterRower quickly gained a cult-like following of both on-water rowers and fitness enthusiasts that had found their perfect piece of workout equipment. As word spread of the new product that simulated the feel of on-water rowing, WaterRower transitioned from simply a one-off product found within the occasional boathouse to an established brand in both the rowing and fitness world.
Outside of resistance type, we found the number-one arbiter of ride feel to be cord quality. Water ergometers tend to employ nylon cords, while air ergometers feature metal chains — a durability factor we anticipated would result in our favoring air. But while all three water rowers aced our expectation of smooth, high-tension strokes, perfecting the chain seems to be more difficult: Some tug with just a slight rumble, others feature bouncy, grinding chains that are incredibly loud, something akin to angry snoring. As for nylon, the best wind and unwind like elastic silk — no slack, no sound, no catching, just perfectly even tension throughout the stroke.
Not a lot to complain about on the Classic rower, but when searching for drawbacks of this rowing machine, the S4 Monitor is the one thing that occasionally comes up. It’s rather basic and it isn’t backlit. Regardless, the monitor has all necessary tracking and features for getting an excellent workout, and in normal lighting there is no problem reading the display.
However, I own an air rower and have zero worries about maxing out it’s ability. I can completely exhaust myself on any type of workout. Air and water rowers are the chosen resistance type by Olympic athletes and any athlete looking to train their full-body cardio. I don’t think they would choose this resistance type if they felt they could max it out.
The WaterRower Xeno Müller Signature Edition rowing machine is handcrafted in solid ash and finished with honey oak stain for color. The WaterRower Xeno Müller Signature Edition has been specifically designed in collaboration with US Olympian and single scull record holder Xeno Müller. This special edition rower features a wider 17" handle and lower footrests for an increased range. Another special feature is Xeno\'s signature included on the rails of either side of the rower thus inspiring you to row like an Olympian!
After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
On theme with C2’s interchangeability, models D or E are essentially the same machine. When we talk about one we’re talking about both. The Concept 2 E is just 8 pounds heavier but is made out of stronger stuff all around — what’s plastic on the model D is aluminium on the model E, and what’s aluminum on the model D is welded steel on the model E. The only noticeable variations are seat height and display position.
Don't know why, perhaps due to rising demand and production bandwidth, but be forewarned quality control is an issue. Assembly is easy enough, though have gap where back separator does not fit snugly after tightening nuts as firm as they will go (see pic). No water level sticker on tank received, so had to measure water manually according to calculations (4 gallons). Siphon was not air tight (even though release valve closed firmly), so had to manually pump instead of siphon. S4 monitor only flashes, not working as of yet and now have to take a apart top of unit to figure out why, currently not resolved after verifying connections and looking at simple solutions on website.
The frame is beyond durable and is designed for absorbing sound and vibration. There’s no creaking or other sounds that you might expect from wood components. It has a low center of gravity that keeps the rower in place while exerting full rowing power. The polycarbonate water tank is equally durable and practically indestructible. The Classic Rower doesn’t have any moving parts that can wear out, or belts and pulleys that need to be maintained.
The water flywheel is comprised of two paddles encased in an enclosed tank of water. As you pull the cable, the paddles move through the water creating resistance. The beauty of this machine is it uses the mass/density of water. The paddles create the drag, so the harder you pull, the more resistance increases. Think about moving your hands through water. The faster you go, the more dense water feels. The slower you go, the less you feel the resistance. And this type of resistance is excellent for your joints. Click here to read the full review.
I loathe exercise. Will do almost anything to avoid it, like holding down a couch or going to wash a car. But the time came to find something that I could do that would get me into regular exercise and make the most of the time. After researching, I found that rowing was almost universally lauded as a great full body workout that does not abuse your joints, and requires only a minimal time commitment. After searching and researching , the Water Rower consistently came out at the top of the pile. So I spent the big bucks and ordered one.
The rowing machine itself is unlike any other on the market with its patented water filled flywheel. It is hard to exactly copy the action of a scull on the water, but the mechanics of the flywheel spinning in water comes in a close second on dry land. The fact that the water is 800 times denser than air means that there is no need for any extra resistance or dampening that you will find in normal air rowers. The faster you pull, the more resistance is generated giving it infinite variability. However, if you want to be able to practice rowing with a faster stroke, you will have to reduce the amount of water in the tank unlike an air rower where you just have to adjust the baffle.
The WaterRower Oxbridge is hand crafted in solid Cherrywood. Like all woods, Cherrywood may vary in color from a red-brown to deep red. The wood will darken in color with exposure to light. For this reason all WaterRower Cherrywood components are kept in light free rooms to protect from shadowing. A new WaterRower Oxbridge will therefore appear quite light in color. The wood will however darken over time reaching a rich reddish hue. Each machine has been hand finished with three coats of Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Cherrywood, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.
SquareTrade Protection Plans are only valid for new or Amazon certified refurbished products purchased at Amazon in the last 30 days. By purchasing this Protection Plan you agree to the Protection Plan Terms & Conditions (http://www.squaretrade.com/terms-standard). Your Protection Plan Terms & Conditions will be delivered via email within 24 hours of purchase