The WaterRower Oxbridge is hand crafted in solid Cherrywood. Like all woods, Cherrywood may vary in color from a red-brown to deep red. The wood will darken in color with exposure to light. For this reason all WaterRower Cherrywood components are kept in light free rooms to protect from shadowing. A new WaterRower Oxbridge will therefore appear quite light in color. The wood will however darken over time reaching a rich reddish hue. Each machine has been hand finished with three coats of Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Cherrywood, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.

This piece of finely tuned, hand-crafted, water-resistance workout equipment also sits at the top end of the rowing machine spectrum. Employing a water flywheel that helps to mimic the feel of rowing in actual water, the natural wood WaterRower Rowing Machine will bring you a smooth, yet challenging workout that is as tough as you want it to be. If rowing is one of the best exercises you can do for your body as far as natural motion with low to no-impact, then the WaterRower is one of the best machines to do it on.
The Challenge AR has the capability to allow the rower to control and adjust the resistance from “Feather light” to “Olympic sprint” delivering a silky smooth resistance to the user’s effort and instantaneous response to input with no “flat sport”.  With water resistance being the most accurate manner in which to simulate actual outdoor rowing, the Challenge AR provides a smooth and consistent sensation throughout the range of motion of the exercise experience.  

Although some rowing machines are made of space-age, super-sweat-resistant metals, you still want to wipe off the equipment after a sweaty workout.  These machines are usually constructed with a lot of various materials and salty sweat can be very corrosive.  Keeping your rowing machine clean can go a long way toward extending its life, and its appearance.


One downside of the Waterrower for me are the footrests. Whilst they are perfectly adequate if you want to row in shoes, rowing barefoot, which is something I like to do, is impossible. The plastic is completely square at the bottom and has sharp edges that cut into your heels. I also found that my shoes get caught when trying to put them in and out of the holders, which is a bit irritating.
A 125-pound person moving at an average pace for 30 minutes on a treadmill will burn roughly 250 calories. However, they aren’t able to take advantage of this after-burn effect. The same person rowing vigorously will burn around to 250 calories but will have less stress placed upon their joints and continue to burn calories after the workout has ended. Rowing machines have been shown to burn on average 800 calories an hour if you work harder and are slightly heavier.
The frame is beyond durable and is designed for absorbing sound and vibration. There’s no creaking or other sounds that you might expect from wood components. It has a low center of gravity that keeps the rower in place while exerting full rowing power. The polycarbonate water tank is equally durable and practically indestructible. The Classic Rower doesn’t have any moving parts that can wear out, or belts and pulleys that need to be maintained.
I teach pilates and also have several pieces of cardio equipment for my clients to warm up on. I bought a Hi, Rise Club Water Rower model a few years ago . as it turns out, my hard core bikers and elliptical walkers really did not use the Rower. SO it is in great shape. A beautiful piece.  I could not get a good photo in my house as there was not enough light, but if you Google this, you can see just what it looks like. 
The WaterRower Natural rowing machine is handcrafted in solid ash wood, stained Honey Oak, and finished with Danish oil. Wood is an excellent material for this application due to its ability to absorb sound and vibration enhancing the WaterRower's smooth, quiet operation. The Natural, as with all WaterRowers, features patented WaterFlywheel technology, unrivaled in its replication of the resistance felt in on the water rowing.
The WaterRower Oxbridge is hand crafted in solid Cherrywood. Like all woods, Cherrywood may vary in color from a red-brown to deep red. The wood will darken in color with exposure to light. For this reason all WaterRower Cherrywood components are kept in light free rooms to protect from shadowing. A new WaterRower Oxbridge will therefore appear quite light in color. The wood will however darken over time reaching a rich reddish hue. Each machine has been hand finished with three coats of Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Cherrywood, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.
Unlike its WaterRower Natural cousin, the WaterRower Club is designed for high-traffic areas, such as commercial gyms, studios, and rehabilitation clinics. Its dual black rails have been styled to prevent scuffing, while the other wood components are finished in an attractive rosewood, which is more resistant to soiling than the Natural model. Other details include four corner wheels on the rails that increase seat stability and reduce the amount of sweat buildup; a frame that flips upright for handy storage; and a weight capacity of up to 1,000 pounds. The WaterRower Club measures 84 by 21 by 22 inches (W x H x D), weighs 117 pounds (with water), and carries a one-year warranty on the frame and components (WaterRower will upgrade the warranty to five years on the frame and three years on the components with the completion of a registration form).
I was introduced to this rower when I joined Orange Theory Fitness four months ago. Since I started using the rower during my OTF sessions I have grown to love the overall workout this thing gives me. In fact, I loved it so much that I purchased the Waterrower Club for my home gym. The overall quality and construction is superb and I'm very satisfied with my purchase. I would highly recommend over any other home gym equipment available. One of the best features is how its so easy to stand up and move out of the way for storage. You can't do that with any treadmill or elliptical. This thing is amazing and worth every penny. Assembly was straightforward and took about 30-45 minutes. Solid, quality construction.

Note: Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Some states do not allow the exclusion on limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
 The amount of water in the tank simulates the weight of the boat and crew, the more water in the tank the heavier the boat and crew. The standard Calibration Level is Level 17. If the user is lighter in weight, Level 15-16 can be used. If the user is heavier in weight, level 18-19 can be used. The maximum level to fill the tank is Level 19. DO NOT fill above the maximum level – this could void the warranty.
 The amount of water in the tank simulates the weight of the boat and crew, the more water in the tank the heavier the boat and crew. The standard Calibration Level is Level 17. If the user is lighter in weight, Level 15-16 can be used. If the user is heavier in weight, level 18-19 can be used. The maximum level to fill the tank is Level 19. DO NOT fill above the maximum level – this could void the warranty.
According to Men’s Total Fitness, rowing machines are not only great for aerobic workouts, but they also work all of your body's major muscle groups. What’s more, you don’t have to go to the gym to work out on a rowing machine, as many manufacturers make high-quality rowing machines -- and even rowing machines that fold up for easy storage -- that are suitable for home use. Two popular types of rowing machines are the water rower and the air rower.
In the rowing machine category, there are a lot of models to chose from. They range in price from under $100 to well over $1500.  As you can imagine, you’re getting a different type of row machine at those ends of the spectrum, but within that variety there’s something for everyone.  To help guide you, we’ve listed our favorite row machine models and brands by price below:
According to Men’s Total Fitness, rowing machines are not only great for aerobic workouts, but they also work all of your body's major muscle groups. What’s more, you don’t have to go to the gym to work out on a rowing machine, as many manufacturers make high-quality rowing machines -- and even rowing machines that fold up for easy storage -- that are suitable for home use. Two popular types of rowing machines are the water rower and the air rower.
Instead of air or hydraulic resistance, the Elite Wave Water Rowing Machine emulates actual rowing with lifelike water resistance. The paddles glide through the water housed in the reservoir, making the rowing stroke smooth from start to finish, and like rowing on a body of water, the resistance increases infinitely the faster you row. Not only does this feel like rowing on water, it sounds like water. Different stroke speeds and intensities vary water motion, resulting in realistic water resonance.

The WaterRower Oxbridge is hand crafted in solid Cherrywood. Like all woods, Cherrywood may vary in color from a red-brown to deep red. The wood will darken in color with exposure to light. For this reason all WaterRower Cherrywood components are kept in light free rooms to protect from shadowing. A new WaterRower Oxbridge will therefore appear quite light in color. The wood will however darken over time reaching a rich reddish hue. Each machine has been hand finished with three coats of Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Cherrywood, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.


Another negative point for me is the angle of the seat. Unlike the Concept2, it has a slight backward angle, which makes it easier to maintain good form at the end of the stroke. Given that the Waterrower has greater resistance at the catch, it puts more pressure on the lower back at this point making it uncomfortable for people like myself with lumbar spine problems.
The proper ratio of effort is about 75 percent lower body and 25 percent upper body. Ensure you’re hitting that by driving through your legs and keeping your hands relaxed. Posture plays a big part, too. Concept 2 recommends imagining your upright profile at noon and tilting from the 11 o’clock position (drive) to the 1 o’clock position (recovery).
Award Winning Design - The WaterRower has been designed to set it apart from other fitness equipment, featuring an attention to detail unseen in other exercise equipment. Refined Design - The WaterRower has been designed to set it apart from other fitness equipment, featuring an attention to design refinement unseen in other exercise equipment. Hand Crafting - WaterRower’s wooden models are handcrafted from a selection of the world’s finest hard woods (Ash, Cherry, Walnut, Beech and Oak).. Each model is hand finished and coated with Danish oil giving it a deep penetrating Luster. Sustainable & Eco-Friendly - All WaterRower's wooden models are crafted from the finest Appalachian hardwoods sourced only from replenishable forests.
The WaterRower Club is hand crafted in solid Ash and stained for color. The WaterRower Club has been designed for High Traffic Areas such as Commercial Gyms, Studios, Rehabilitation Clinics, etc. Its Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which are more resistant to soiling than the Natural model. Each machine has been hand finished with Danish Oil and Urethane for protection. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. s For reasons of ecology, all our woods are harvested from replenishable forests.
The WaterRower Natural is handcrafted in solid ash and stained honey oak for consistency of color. The wood was chosen due to its marvelous engineering properties, especially its ability to absorb sound and vibration, which enhances the WaterRower's quiet performance and smooth operation. Ash, like all woods used in the construction of the WaterRower, is a premium hardwood with incredible longevity and dimensional stability. In addition, the wood is harvested from replenishable forests and is hand finished with Danish oil to provide a deep luster.
×