Other details include dual rails with four corner wheels that increase seat stability and reduce the amount of sweat buildup; a frame that flips upright for handy storage; and a weight capacity of up to 1,000 pounds. The WaterRower Natural measures 84 by 21 by 22 inches (W x H x D), weighs 117 pounds (with water), and carries a one-year warranty on the frame and components (WaterRower will upgrade the warranty to five years on the frame and three years on the components with the completion of a registration form).

If you're looking at a WaterRower, you're probably also considering the Concept2. They're both great machines, but which you choose depends on your needs. I think the WaterRower is ideal for most people, but not everyone. The WaterRower has a number of advantages vs the Concept 2 - it is quieter, the mechanism up front is lower profile, it has a comfortable seat, it is much better looking, it's easier to stand up when you're not rowing and it's just ... zen-like. There is something about the smoothness of the WaterRower that makes it a joy to use, and because it's quiet you can easily stream your favorite binge-series without cranking the volume too high.
This elegant rowing machine builds strength and stamina by closely simulating a real world rowing experience. Its patented Waterflywheel, which moves through actual water, provides a smooth stroke that exercises 84% of your muscle mass evenly and prevents injuries. When not in use, the WaterRower can be stored vertically against a wall. Made in the USA from ethically sourced walnut wood. Assembly required.
If you’re interested in using a rowing machine for focused training — whether for outdoor rowing, an indoor competition, or as part of a larger fitness program — you’ll want air resistance. If you’re drawn to rowers for the enjoyability (alongside the full-body, cardio-plus-strength training efficacy) of a rowing workout, consider a machine with water resistance.
Assembly was challenging. One of the rails could not be attached because the embedded screw in the cross-beam was too crooked to fit into the hole on the rail. I had to place a nut on it to protect the screws and tap until it was true enough cap nut to be attached. The foot board is slightly wider than the top board. I will sand this to match when I reapply the finish. This will need to be done because the wood has a dry, ashy appearance. The wood is beautiful and mostly uniform. This rowing machine is a nice product, but the build quality of the unit I received was disappointing. I felt lucky that the gashes in the carton did not damage the product as the packaging was optimistic. The leading competitor I use at the gym seems to provide slightly more resistance. It is beautiful and useful, but with room for improvement.
The Concept2 Model D Indoor Rowing Machine includes the excellent PM5 monitor that provides all vital data. It can display your workout performance in two ways. You can choose to see your workout in total distance and time, or as “splits”. Splits is a way of seeing how your pace is varying along two set points. Either way is useful, but splits give you more of a “real-time”, in the moment calculation of how you are doing.
If you are accustomed to the natural catch and feel of on-water rowing, your rowing technique will immediately appreciate the Apollo’s unrivalled emulation of a boat gliding through water. FDF’s patented twin tank design generates a smooth uniform stroke, including no lag of resistance at the catch and continued resistance all the way to the finish.
Storage is also a plus point for the Waterrower series as they are all designed to stand upright with the tank acting as ballast for stability. In this position they only take up around two square feet. Again, great if you are planning on training in the living room. However, if you have small children, I would advise fixing the top to the wall with a hook and strap.
 The amount of water in the tank simulates the weight of the boat and crew, the more water in the tank the heavier the boat and crew. The standard Calibration Level is Level 17. If the user is lighter in weight, Level 15-16 can be used. If the user is heavier in weight, level 18-19 can be used. The maximum level to fill the tank is Level 19. DO NOT fill above the maximum level – this could void the warranty.

Water rowers are just a recent invention followed by the air rower, which utilizes paddles and water in order to create the resistance. While there are a lot of people who prefer the air rower compared to this one, there are also people who prefer the water rower because it has a smoother, quieter feel of the action, especially when emulating the movement of water rowing. Like the air rower, this machine is able to burn calories and work up your muscles through offering resistance to your movement while sitting on the sliding seat. The more resistance there is, the more it makes it harder to work on the machine and your workout becomes more challenging.


On theme with C2’s interchangeability, models D or E are essentially the same machine. When we talk about one we’re talking about both. The Concept 2 E is just 8 pounds heavier but is made out of stronger stuff all around — what’s plastic on the model D is aluminium on the model E, and what’s aluminum on the model D is welded steel on the model E. The only noticeable variations are seat height and display position.
Comparing the rowing machine to the stationary bike, the rowing machine is superior in terms of calories burned. Yet, it’s important to note that the stationary bike is also easy on the joints and only includes the lower body. So, if you have any upper body problems then the stationary bike will be a much better choice. In 30 minutes of cycling 12-13 miles per hour, an 125lb individual will burn around 225-250 calories.

The WaterRower Natural rowing machine is handcrafted in solid ash wood, stained Honey Oak, and finished with Danish oil. Wood is an excellent material for this application due to its ability to absorb sound and vibration enhancing the WaterRower's smooth, quiet operation. The Natural, as with all WaterRowers, features patented WaterFlywheel technology, unrivaled in its replication of the resistance felt in on the water rowing.

Con's: Super bummed that for $1160 they couldn't include an internal ANT+ transponder and Heart Rate strap(sub $100 package). The foot straps are crap! Within the first 1000m of moderate rowing they loosen to the point of being able to pull foot out on Recovery of stroke(Yes, even with ball of foot down). I really wish the WaterCoach F.I.T. software for the S4 Monitor was macOS compatible. It'd be nice to able to customer program workouts on my MacBook Pro or iMac.
If the machine is to be housed on a wooden floor you will need a mat beneath to reduce vibration and also noise. If space is tight, the hydraulic options are usually the smallest. It's also worth checking your floor can take the weight if you're going for one of the bigger, heavier models. For most, this shouldn't be a problem, if you have any doubts get a surveyor to check as it could be a very expensive mistake!
Meticulous care is taken in the creation of each rowing machine, ensures the WaterRower ethos of elegant design and American craftsmanship is evident whether in use or in storage. The soothing sound of our patented water resistance is both blissful and motivational. Creature-comforts can be found throughout, from the ergonomic handle, remarkably comfortable seat cushion and user-friendly performance monitor, you will find yourself searching out reasons to "sneak in" an added WaterRower workout into your day. When finished, the WaterRower stores with ease, while blending seamlessly into any environment, ensuring your design and décor values are never compromised by your fitness lifestyle.

This elegant rowing machine builds strength and stamina by closely simulating a real world rowing experience. Its patented Waterflywheel, which moves through actual water, provides a smooth stroke that exercises 84% of your muscle mass evenly and prevents injuries. When not in use, the WaterRower can be stored vertically against a wall. Made in the USA from ethically sourced walnut wood. Assembly required.
This is a company known for quality as well as stewardship for over 20 years. WaterRower hand-crafts their rowing machines to be more than just a workout machine, but also a work of art as well. Also, WaterRower is and has been on the cutting edge of environmental sustainability with their use of the best hardwoods coming from renewable forests. We’re in excellent hands here.

When a product is listed as Pre-Order, such product is not yet in stock but is available for advanced purchase on our site, prior to the manufacturer's public release date. Pre-Order items are shipped once in stock and the public release date arrives. You will be notified of a product's updated status by email. The expected shipment time is listed on the Product Detail page.

After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.

No matter the resistance we set or the power we applied, the machine remains sturdy, centered, and even. We amped up the intensity for 2000m sprints and found that the C2 supports consistent effort in a way water resistance can’t. The machine assists in keeping your intensity uniform, because it stores up remaining energy in the spinning flywheel. Comments about the ride feel of both Concept 2s were noticeably brief. As one tester put it, “It’s unremarkable because it’s good,” and leaves you free to focus on the effort you’re putting into your workout.
If you're looking at a WaterRower, you're probably also considering the Concept2. They're both great machines, but which you choose depends on your needs. I think the WaterRower is ideal for most people, but not everyone. The WaterRower has a number of advantages vs the Concept 2 - it is quieter, the mechanism up front is lower profile, it has a comfortable seat, it is much better looking, it's easier to stand up when you're not rowing and it's just ... zen-like. There is something about the smoothness of the WaterRower that makes it a joy to use, and because it's quiet you can easily stream your favorite binge-series without cranking the volume too high.
×