One downside of the Waterrower for me are the footrests. Whilst they are perfectly adequate if you want to row in shoes, rowing barefoot, which is something I like to do, is impossible. The plastic is completely square at the bottom and has sharp edges that cut into your heels. I also found that my shoes get caught when trying to put them in and out of the holders, which is a bit irritating.
There is much to love about the WaterRower--and I do love it--but I would echo others' comments that although the seat rolls solidly and smoothly on the wood rails, the seat itself is very hard (I use a gel seat pad I bought for my hard fiberglass kayak seat), and the footpads are in need up rethinking and upgrading--the cheap plastic doesn't let you row in socks or barefoot and is not really worthy of a machine that is otherwise a stunning piece of engineering and a beautiful one as well. As one other person noted about his machine, my machine made a clicking noise on the return stroke, so I had to adjust the wheel underneath the top rail that connects to the footpad and pull it away gently from where it was rubbing against another component. Also, be warned: the instruction booklet is in the DVD case. I did not see the little sticker on the case telling me that, thinking I'd wait to watch the DVD until after I'd assembled it. But WaterRower has a copy of the assembly instructions on their website, along with a video (I found the written ones better and easier to follow), so I was able to assemble it with no difficulty.
The WaterRower Natural is handcrafted in solid ash and stained honey oak for consistency of color. The wood was chosen due to its marvelous engineering properties, especially its ability to absorb sound and vibration, which enhances the WaterRower's quiet performance and smooth operation. Ash, like all woods used in the construction of the WaterRower, is a premium hardwood with incredible longevity and dimensional stability. In addition, the wood is harvested from replenishable forests and is hand finished with Danish oil to provide a deep luster.
It's been nearly 30 years since John Duke, a former Yale University and USA National Team oarsman, set up a small shop in Rhode Island, USA to begin fine-tuning his innovative water-resistant rowing machine. With its beautiful design and unmatched feel, the WaterRower quickly gained a cult-like following of both on-water rowers and fitness enthusiasts that had found their perfect piece of workout equipment. As word spread of the new product that simulated the feel of on-water rowing, WaterRower transitioned from simply a one-off product found within the occasional boathouse to an established brand in both the rowing and fitness world.

It's been nearly 30 years since John Duke, a former Yale University and USA National Team oarsman, set up a small shop in Rhode Island, USA to begin fine-tuning his innovative water-resistant rowing machine. With its beautiful design and unmatched feel, the WaterRower quickly gained a cult-like following of both on-water rowers and fitness enthusiasts that had found their perfect piece of workout equipment. As word spread of the new product that simulated the feel of on-water rowing, WaterRower transitioned from simply a one-off product found within the occasional boathouse to an established brand in both the rowing and fitness world.


After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
This piece of finely tuned, hand-crafted, water-resistance workout equipment also sits at the top end of the rowing machine spectrum. Employing a water flywheel that helps to mimic the feel of rowing in actual water, the natural wood WaterRower Rowing Machine will bring you a smooth, yet challenging workout that is as tough as you want it to be. If rowing is one of the best exercises you can do for your body as far as natural motion with low to no-impact, then the WaterRower is one of the best machines to do it on.

The frame is beyond durable and is designed for absorbing sound and vibration. There’s no creaking or other sounds that you might expect from wood components. It has a low center of gravity that keeps the rower in place while exerting full rowing power. The polycarbonate water tank is equally durable and practically indestructible. The Classic Rower doesn’t have any moving parts that can wear out, or belts and pulleys that need to be maintained.
The dense resistance of water creates substantial drag, but on the WaterRower models, this is perfectly tempered by a whippy cord. It coils and recoils with such steady speed that one tester noted how the Classic “eats the rope back up on recovery.” This smooth agility helps balance out the impact of encountering slow water at the start of every stroke.
John Duke, creator of the WaterRower, was inspired to try his hand at invention while working at a subsidiary for U.S. Steel. He wanted to make an indoor machine that felt as much like real rowing as possible, with a focus on aesthetics. It took him two years to get the design right, moving past failed ideas such as a flipper in the tank instead of a clutch. What began as a series of doodles at his desk turned into a sculptural piece of exercise equipment that upends expectations in two ways: by bringing water indoors, and by looking elegant and artful when stored.
This popular rowing machine utilizes magnetic resistance for a quiet, and very smooth workout. The Velocity Exercise CHR-2001 also features a programmable computer with 12 programs that will keep your exercising varied and challenging for years. The computer also provides data on distance, time, calories burned, pulse rate, strokes per minute, and stroke count. Additionally, the tension resistance is electronically controlled via the computer.  This electronic resistance control feature puts the CHR-2001 ahead of other magnetic rowers that tend to use knobs.
Comparing the rowing machine to the stationary bike, the rowing machine is superior in terms of calories burned. Yet, it’s important to note that the stationary bike is also easy on the joints and only includes the lower body. So, if you have any upper body problems then the stationary bike will be a much better choice. In 30 minutes of cycling 12-13 miles per hour, an 125lb individual will burn around 225-250 calories.
The WaterRower Xeno Müller Signature Edition rowing machine is handcrafted in solid ash and finished with honey oak stain for color. The WaterRower Xeno Müller Signature Edition has been specifically designed in collaboration with US Olympian and single scull record holder Xeno Müller. This special edition rower features a wider 17" handle and lower footrests for an increased range. Another special feature is Xeno\'s signature included on the rails of either side of the rower thus inspiring you to row like an Olympian!

Other details include dual rails with four corner wheels that increase seat stability and reduce the amount of sweat buildup; a frame that flips upright for handy storage; and a weight capacity of up to 1,000 pounds. The WaterRower Classic measures 84 by 21 by 22 inches (W x H x D), weighs 117 pounds (with water), and carries a one-year warranty on the frame and components (WaterRower will upgrade the warranty to five years on the frame and three years on the components with the completion of a registration form).


 Bring the unparalleled full-body workout of on-the-water rowing home with the premium design and feel of the XTERRA Fitness ERG600W Water Rower. The full body rhythmic nature of rowing makes it wonderfully efficient at burning calories while also developing flexibility and strength. Plus, the "zen-like" water movement you hear from the ERG600W multi-bladed impeller can be soothing and meditative. The large and easy to read 5.5" LCD console with height and angle adjustment includes motivating programmable modes to keep you involved, inspired, and reaching your goals.

Please Note: If you select Express or Expedited shipping, your order must be received and credit must be approved by 12:30 p.m. EST, or it may not be processed until the next business day. Expedited shipping is available for select products. You can view complete shipping options for your product in your shopping cart. The estimated delivery date for your order will be provided on the order review page prior to completing the order.


I teach pilates and also have several pieces of cardio equipment for my clients to warm up on. I bought a Hi, Rise Club Water Rower model a few years ago . as it turns out, my hard core bikers and elliptical walkers really did not use the Rower. SO it is in great shape. A beautiful piece.  I could not get a good photo in my house as there was not enough light, but if you Google this, you can see just what it looks like. 
Row, Jimmy, row…🎶 What’s one of the best things about using the WaterRower? There’s no such thing as an age limit when it comes to using it because of its ability to provide a workout with minimal impact on the joints. You don’t have to take our word for it, but we think you might want to take this fellas. Jimmy is 93 years young and hopped on the WaterRower for the first time yesterday. Let’s hear it for Jimmy!

We picked the brains of rowing coaches, fitness experts, and physical therapists to learn what features make for an exceptional rower. Based on their input, we searched the market for air and water resistance rowing machines, then tested the best for ride feel and design. We found one model of each type — air resistance and water resistance — that felt truly superior to the others.
Products listed as Out of Stock are currently not in stock at the store(s) being viewed. Note that in some instances, very limited inventory may be available in stores, but because of small quantities we are unable to reflect the availability online. Please remember to check back – if or when inventory is replenished and available, this will be reflected online.

After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.

×