As with any fitness activity, it’s important to exercise with proper technique, however. The big muscles in the legs are where most of the workout action should be. Injury to the lower back can occur from bending too far forward in the row. It’s best to maintain a upright 90 degree angle to the rowing machine’s seat and slider bar. Using the legs for the motion rather than relying as heavily on the back or arms can help reduce the chance of muscle pulls or other related injuries. Always check with a physician before starting any new fitness regimen.
The Waterrower has recently been made famous by Kevin Spacy as the rowing machine used in the ‘House of Cards’. It is a type of wooden rowing machine produced and manufactured by Waterrower Inc. in New England, USA. The rowers were designed by ex-US national team rower john Duke in the mid 1980’s and the company to manufacture them was established in 1988.
The overall rowing experience encompasses pulley, seat, and — of course — resistance. Air and water have very distinct qualities, making them impossible to compare but interesting to contrast. Air stores inertia, which feeds into intense, constant effort during a goal-oriented workout. Water’s more sluggish drag makes for demanding exercise, but one that’s less consistent.
One downside of the Waterrower for me are the footrests. Whilst they are perfectly adequate if you want to row in shoes, rowing barefoot, which is something I like to do, is impossible. The plastic is completely square at the bottom and has sharp edges that cut into your heels. I also found that my shoes get caught when trying to put them in and out of the holders, which is a bit irritating.
Reviews.com has an advertising relationship with some of the offers included on this page. However, the rankings and listings of our reviews, tools and all other content are based on objective analysis. For more information, please check out our full Advertiser Disclosure. Reviews.com strives to keep its information accurate and up to date. The information in our reviews could be different from what you find when visiting a financial institution, service provider or a specific product’s website. All products are presented without warranty.
Unlike the 1445, the Elite Wave Water Rowing Machine includes an upgraded, high-end fitness monitor and a chest strap heart rate sensor. Programmed to sync seamlessly with the multi-function monitor, the data the sensor provides allows you to tailor your workout. For example, you can target a certain heart rate for weight loss or to increase endurance by adjusting your rowing speed and therefore, your rowing intensity. In addition to pulse, the multi-function monitor also tracks distance, time, calories burned, stroke count and strokes per minute to further motivate you during your rowing session. For further customization, users can also add or remove water using the included siphon to either increase or decrease the resistance.
Water rowers feature a tank that is actually filled with water as a means for resistance. As you increase the pace of rowing, the resistance naturally increases as well. This means that you can set your own pace and resistance in a single motion. The same is true for air rowers. Air rowers use a fan or flywheel to create resistance, and you have control over the intensity of the workout due to the fact that the air resistance depends on your pace. Most water and air rowers come equipped with -- or at least have as an option -- monitors that track various functions such as distance, strokes, strokes per minute and calories burned.
The dense resistance of water creates substantial drag, but on the WaterRower models, this is perfectly tempered by a whippy cord. It coils and recoils with such steady speed that one tester noted how the Classic “eats the rope back up on recovery.” This smooth agility helps balance out the impact of encountering slow water at the start of every stroke.
After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.

The WaterRower Club is handcrafted from solid Ash wood, finished with a black and rose stain and danish oil. The WaterRower's patented WaterFlywheel has been specifically designed to emulate the dynamics of a boat moving though water and is unsurpassed in its simulation of the physical and physiological benefits of rowing. WaterRower will not provide support or documentation for any product transported outside of the original country of purchase


Assembly was challenging. One of the rails could not be attached because the embedded screw in the cross-beam was too crooked to fit into the hole on the rail. I had to place a nut on it to protect the screws and tap until it was true enough cap nut to be attached. The foot board is slightly wider than the top board. I will sand this to match when I reapply the finish. This will need to be done because the wood has a dry, ashy appearance. The wood is beautiful and mostly uniform. This rowing machine is a nice product, but the build quality of the unit I received was disappointing. I felt lucky that the gashes in the carton did not damage the product as the packaging was optimistic. The leading competitor I use at the gym seems to provide slightly more resistance. It is beautiful and useful, but with room for improvement.

The Challenge AR has the capability to allow the rower to control and adjust the resistance from “Feather light” to “Olympic sprint” delivering a silky smooth resistance to the user’s effort and instantaneous response to input with no “flat sport”.  With water resistance being the most accurate manner in which to simulate actual outdoor rowing, the Challenge AR provides a smooth and consistent sensation throughout the range of motion of the exercise experience.  


If you are anything like me, you read the negative reviews to see what some of the complaints could potentially be...I have found none that match with my machine or experience so far. The boxes it came in were a little bunged-up but everything on the inside was perfect. Only took about 15-20 minutes to build (first time building a row machine) and another 5-10 to fill with water. We used it for a little while before we added the danish oil.
Rowing has long been recognized as the perfect aerobic pursuit, with naturally smooth and flowing movements that don't tax the joints but do boost the heart rate. Now you can take your rowing experience to the next level with the commercial-quality WaterRower Club rowing machine. Using the same principles that govern the dynamics of a boat in water, the WaterRower Club is outfitted with a "water flywheel" that consists of two paddles in an enclosed tank of water that provide smooth, quiet resistance, just like the paddles in an actual body of water. As a result, the machine has no moving parts that can wear out over time (even the recoil belt and pulleys don't require lubricating or maintaining). More significantly, the water tank and flywheel create a self-regulating resistance system that eliminates the need for a motor. As with real rowing, when you paddle faster, the increased drag provides more resistance. When you paddle slower, the resistance is less intense. The only limit to how fast you can row is your strength and your ability to overcome drag. And unlike conventional rowing machines, which tend to be jerky and jarring, the WaterRower Club is remarkably smooth and fluid.
The Waterrower has recently been made famous by Kevin Spacy as the rowing machine used in the ‘House of Cards’. It is a type of wooden rowing machine produced and manufactured by Waterrower Inc. in New England, USA. The rowers were designed by ex-US national team rower john Duke in the mid 1980’s and the company to manufacture them was established in 1988.

The main advantages of the water rower are that it has quiet operation; there is only little maintenance to do, the water only needs to be changed occasionally; many users love the whooshing sound of water in the tank; and its consistently smooth resistance at every stroke. Two disadvantages of this machine are it costs a lot than the air rower; and it tends to be larger in size compared to the other rowing machines.


This piece of finely tuned, hand-crafted, water-resistance workout equipment also sits at the top end of the rowing machine spectrum. Employing a water flywheel that helps to mimic the feel of rowing in actual water, the natural wood WaterRower Rowing Machine will bring you a smooth, yet challenging workout that is as tough as you want it to be. If rowing is one of the best exercises you can do for your body as far as natural motion with low to no-impact, then the WaterRower is one of the best machines to do it on.

This twenty minutes duration technique is designed to max your muscles out every interval, and at the same time the recovery periods assist in increasing the efficiency with the fat burning routine. Once you have prepared your rowing machine, set its resistance to four. Perform sets of ten, fifteen and twenty power strokes by pulling to handle towards the torso of your body, like doing a rowing motion. Do this motion as fast as your body permits you to. Separate your power strokes at sixty seconds, putting in only fifty percent the effort you did before this. Repeat this cycle until you have fully rowed for a total of twenty minutes.
From a fitness perspective, the WaterRower Natural works 84 percent of your muscle mass, helping tone and strengthen your muscles while burning far more calories than most other aerobic machines. The exercise is also low impact, as it removes all the body weight from the ankles, knees, and hips, but still moves the limbs and joints through a full range of motion--from completely extended to completely contracted.
×