Assembly was challenging. One of the rails could not be attached because the embedded screw in the cross-beam was too crooked to fit into the hole on the rail. I had to place a nut on it to protect the screws and tap until it was true enough cap nut to be attached. The foot board is slightly wider than the top board. I will sand this to match when I reapply the finish. This will need to be done because the wood has a dry, ashy appearance. The wood is beautiful and mostly uniform. This rowing machine is a nice product, but the build quality of the unit I received was disappointing. I felt lucky that the gashes in the carton did not damage the product as the packaging was optimistic. The leading competitor I use at the gym seems to provide slightly more resistance. It is beautiful and useful, but with room for improvement.

The proper ratio of effort is about 75 percent lower body and 25 percent upper body. Ensure you’re hitting that by driving through your legs and keeping your hands relaxed. Posture plays a big part, too. Concept 2 recommends imagining your upright profile at noon and tilting from the 11 o’clock position (drive) to the 1 o’clock position (recovery).


There is some minor maintenance. Because it's made out of wood, which can expand and contract, the bolts need tightening every few months or so. It's easy and takes only a couple of minutes. That, and putting in a fresh water purification tablet every six to twelve months, are about it for regular maintenance. The only problem I've had with the rower (the reason for 4 stars instead of 5) was a squeak that developed after about 6 weeks. It took me some time to determine the source of the squeak, which was a metal bracket connecting the footrest board to the horizontal boards above the drum. I had to partially disassemble the top section and tighten four bolts, but that fixed the problem and it's been quiet ever since.


Unlike its WaterRower Natural cousin, the WaterRower Club is designed for high-traffic areas, such as commercial gyms, studios, and rehabilitation clinics. Its dual black rails have been styled to prevent scuffing, while the other wood components are finished in an attractive rosewood, which is more resistant to soiling than the Natural model. Other details include four corner wheels on the rails that increase seat stability and reduce the amount of sweat buildup; a frame that flips upright for handy storage; and a weight capacity of up to 1,000 pounds. The WaterRower Club measures 84 by 21 by 22 inches (W x H x D), weighs 117 pounds (with water), and carries a one-year warranty on the frame and components (WaterRower will upgrade the warranty to five years on the frame and three years on the components with the completion of a registration form).
The WaterRower Natural is hand crafted in solid Ash and stained Honey Oak for consistency of color. Each machine has been hand finished with Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use.
This elegant rowing machine builds strength and stamina by closely simulating a real world rowing experience. Its patented Waterflywheel, which moves through actual water, provides a smooth stroke that exercises 84% of your muscle mass evenly and prevents injuries. When not in use, the WaterRower can be stored vertically against a wall. Made in the USA from ethically sourced walnut wood. Assembly required.
Another negative point for me is the angle of the seat. Unlike the Concept2, it has a slight backward angle, which makes it easier to maintain good form at the end of the stroke. Given that the Waterrower has greater resistance at the catch, it puts more pressure on the lower back at this point making it uncomfortable for people like myself with lumbar spine problems.
The WaterRower Oxbridge is hand crafted in solid Cherrywood. Like all woods, Cherrywood may vary in color from a red-brown to deep red. The wood will darken in color with exposure to light. For this reason all WaterRower Cherrywood components are kept in light free rooms to protect from shadowing. A new WaterRower Oxbridge will therefore appear quite light in color. The wood will however darken over time reaching a rich reddish hue. Each machine has been hand finished with three coats of Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Cherrywood, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.
Most of the Waterrower range is made of wood harvested from the sustainably managed Appalachian forests of the eastern United States. The machines are extremely well built and are beautiful to look at coming in Ash, Oak or Cherry wood. If you are concerned about having an exercise machine in a living area, then one of the wooden models will fit right in to your living room. They are also extremely quiet in operation due to the wooden construction and the use of a strap rather that a chain. The only thing you can really hear is the swishing sound of the water in the tank as you pull giving you the feeling that you are really on the river!
Please Note: If you select Express or Expedited shipping, your order must be received and credit must be approved by 12:30 p.m. EST, or it may not be processed until the next business day. Expedited shipping is available for select products. You can view complete shipping options for your product in your shopping cart. The estimated delivery date for your order will be provided on the order review page prior to completing the order.
After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
I am happy with this rowing machine..it is quiet and offers good resistence without puttong too much stress on my joints...HOWEVER...the electronic counter has NOT worked from day one!!!..pulling the handle does NOT activate the meter at all!...I hve pluged in the wires and repeated that process SEVERAL times..BUT...nothing!!...I can activate the meter manually...BUT...it is USELESS for registering any rowing activity!!..As I said...good rower....USELESS Eleconic meter!!!
The WaterRower Xeno Müller Signature Edition rowing machine is handcrafted in solid ash and finished with honey oak stain for color. The WaterRower Xeno Müller Signature Edition has been specifically designed in collaboration with US Olympian and single scull record holder Xeno Müller. This special edition rower features a wider 17" handle and lower footrests for an increased range. Another special feature is Xeno\'s signature included on the rails of either side of the rower thus inspiring you to row like an Olympian!

There are 4 main rowing machine types that are classed according to its utilized resistance mechanism. Having an exercise workout needs to have resistance against the movement in order to provide to the muscles and the cardiovascular system a good change. This can be provided by the rowing machine whenever you pull its handle and then slide back to the seat. Having low resistance works on the cardiovascular system can make you row fast easily. Having high resistance means that it provides you with the anaerobic session, working with the muscles harder, also having a slow stroke rate because of the harder pull.
The water flywheel is comprised of two paddles encased in an enclosed tank of water. As you pull the cable, the paddles move through the water creating resistance. The beauty of this machine is it uses the mass/density of water. The paddles create the drag, so the harder you pull, the more resistance increases. Think about moving your hands through water. The faster you go, the more dense water feels. The slower you go, the less you feel the resistance. And this type of resistance is excellent for your joints. Click here to read the full review.
Velocity Exercise puts a premium on comfort here with a polyurethane molded saddle seat, and magnetic drum resistance contributes to a row machine that is durable, won’t need much or any maintenance, and, as we mentioned does not create much noise in use. This makes it easy to row while watching TV or listening to music. It also means the other people in your home won’t be listening to you workout quite as much. Easy to assemble and store, the Velocity Exercise Magnetic Rower CHR-2001 is a good choice for a mid-priced rower.  Click here to read the full review.
Water rowers are just a recent invention followed by the air rower, which utilizes paddles and water in order to create the resistance. While there are a lot of people who prefer the air rower compared to this one, there are also people who prefer the water rower because it has a smoother, quieter feel of the action, especially when emulating the movement of water rowing. Like the air rower, this machine is able to burn calories and work up your muscles through offering resistance to your movement while sitting on the sliding seat. The more resistance there is, the more it makes it harder to work on the machine and your workout becomes more challenging.

Instead of air or hydraulic resistance, the Elite Wave Water Rowing Machine emulates actual rowing with lifelike water resistance. The paddles glide through the water housed in the reservoir, making the rowing stroke smooth from start to finish, and like rowing on a body of water, the resistance increases infinitely the faster you row. Not only does this feel like rowing on water, it sounds like water. Different stroke speeds and intensities vary water motion, resulting in realistic water resonance.


As I mentioned, the rowing experience with the WaterRower is amazing. I bought the rower for myself, but my wife was curious and decided to try it out. She loves it, and now rows almost daily. We have a treadmill that neither of us has used since we started rowing - the WaterRower is a much better workout and much more enjoyable at the same time. It's easy to adjust the intensity, pace and duration of your exercise. There is nothing to change on the rower (* see note below), you just row harder or faster, adjust how far you lean forward and back during your stroke. The WaterRower will keep up with you as your fitness increases, all you need to do is keep throwing more and more at it.
×