Unlike the 1445, the Elite Wave Water Rowing Machine includes an upgraded, high-end fitness monitor and a chest strap heart rate sensor. Programmed to sync seamlessly with the multi-function monitor, the data the sensor provides allows you to tailor your workout. For example, you can target a certain heart rate for weight loss or to increase endurance by adjusting your rowing speed and therefore, your rowing intensity. In addition to pulse, the multi-function monitor also tracks distance, time, calories burned, stroke count and strokes per minute to further motivate you during your rowing session. For further customization, users can also add or remove water using the included siphon to either increase or decrease the resistance.
The Challenge AR features an advanced computer monitor providing the rower with measurable performance output, an ergonomically designed seat that rides on precision bearings and rollers for absolute smoothness, an upgraded footboard with advanced heel support, and an innovative soft grip handle to eliminate stress on the hands and wrist during the comfortable, but physical workout.
1.) I keep reading about cracks and leaks that develop in the water tank. WaterRower even offers a tank repair kit for this very issue. It seems to me that this is a design flaw that they refuse to address, instead offering a fix for when it eventually occurs. Have you seen these tanks to eventually leak? I’m surprised they haven’t tried a one-piece tank.

This twenty minutes duration technique is designed to max your muscles out every interval, and at the same time the recovery periods assist in increasing the efficiency with the fat burning routine. Once you have prepared your rowing machine, set its resistance to four. Perform sets of ten, fifteen and twenty power strokes by pulling to handle towards the torso of your body, like doing a rowing motion. Do this motion as fast as your body permits you to. Separate your power strokes at sixty seconds, putting in only fifty percent the effort you did before this. Repeat this cycle until you have fully rowed for a total of twenty minutes.
Now back to the aesthetics, this version of WaterRower’s natural wood line of rowers comes in beautiful Black Walnut, which the company chose for its superior sound and vibration absorption. It’s hand-made in the USA and comes with excellent warranties and customer service. Overall, WaterRower is known for the quality of their rowing machines and the Classic is no exception.  And if you do want to get this rower just as an attractive conversation piece, it easily stores upright against a wall.  That said, we strongly recommend using The WaterRower Classic Rowing Machine for fitness, not just eye-candy.
Award Winning Design - The WaterRower has been designed to set it apart from other fitness equipment, featuring an attention to detail unseen in other exercise equipment. Refined Design - The WaterRower has been designed to set it apart from other fitness equipment, featuring an attention to design refinement unseen in other exercise equipment. Hand Crafting - WaterRower’s wooden models are handcrafted from a selection of the world’s finest hard woods (Ash, Cherry, Walnut, Beech and Oak).. Each model is hand finished and coated with Danish oil giving it a deep penetrating Luster. Sustainable & Eco-Friendly - All WaterRower's wooden models are crafted from the finest Appalachian hardwoods sourced only from replenishable forests.

Rowing has long been recognized as the perfect aerobic pursuit, with naturally smooth and flowing movements that don't tax the joints but do boost the heart rate. Now you can take your rowing experience to the next level with the commercial-quality WaterRower Club rowing machine. Using the same principles that govern the dynamics of a boat in water, the WaterRower Club is outfitted with a "water flywheel" that consists of two paddles in an enclosed tank of water that provide smooth, quiet resistance, just like the paddles in an actual body of water. As a result, the machine has no moving parts that can wear out over time (even the recoil belt and pulleys don't require lubricating or maintaining). More significantly, the water tank and flywheel create a self-regulating resistance system that eliminates the need for a motor. As with real rowing, when you paddle faster, the increased drag provides more resistance. When you paddle slower, the resistance is less intense. The only limit to how fast you can row is your strength and your ability to overcome drag. And unlike conventional rowing machines, which tend to be jerky and jarring, the WaterRower Club is remarkably smooth and fluid.
Rowing machines are often used by people who are looking to get a full-body workout, and also by rowers to stay in rowing shape during the off-season. According to Men’s Total Health, rowing is a natural motion, and is therefore fairly easy for anyone to pick up and do properly. Also, rowing is a low-impact exercise, meaning that the potential for injuries to your joints is lower than on such machines as treadmills, for example.
Just reading the title will make you think that you are going to row a water vessel out in the rapids. But in this article we’re going to be talking about a different type of water rowing. This is a type of rowing machine that provides the most amazing total body workout among the cardio machine. The reason why it is a good option for you is because it will work on all of your body equally, from the upper part to the lower part, which may lead to amazing gains in all throughout your cardiovascular fitness. You do not need a boat to start rowing. All you need is this equipment and you are ready to go.
After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
However, I own an air rower and have zero worries about maxing out it’s ability. I can completely exhaust myself on any type of workout. Air and water rowers are the chosen resistance type by Olympic athletes and any athlete looking to train their full-body cardio. I don’t think they would choose this resistance type if they felt they could max it out.
Products listed as Out of Stock are currently not in stock at the store(s) being viewed. Note that in some instances, very limited inventory may be available in stores, but because of small quantities we are unable to reflect the availability online. Please remember to check back – if or when inventory is replenished and available, this will be reflected online.
Now back to the aesthetics, this version of WaterRower’s natural wood line of rowers comes in beautiful Black Walnut, which the company chose for its superior sound and vibration absorption. It’s hand-made in the USA and comes with excellent warranties and customer service. Overall, WaterRower is known for the quality of their rowing machines and the Classic is no exception.  And if you do want to get this rower just as an attractive conversation piece, it easily stores upright against a wall.  That said, we strongly recommend using The WaterRower Classic Rowing Machine for fitness, not just eye-candy.
The main advantages of the water rower are that it has quiet operation; there is only little maintenance to do, the water only needs to be changed occasionally; many users love the whooshing sound of water in the tank; and its consistently smooth resistance at every stroke. Two disadvantages of this machine are it costs a lot than the air rower; and it tends to be larger in size compared to the other rowing machines.

Not a lot to complain about on the Classic rower, but when searching for drawbacks of this rowing machine, the S4 Monitor is the one thing that occasionally comes up.  It’s rather basic and it isn’t backlit. Regardless, the monitor has all necessary tracking and features for getting an excellent workout, and in normal lighting there is no problem reading the display.

A 125-pound person moving at an average pace for 30 minutes on a treadmill will burn roughly 250 calories. However, they aren’t able to take advantage of this after-burn effect. The same person rowing vigorously will burn around to 250 calories but will have less stress placed upon their joints and continue to burn calories after the workout has ended. Rowing machines have been shown to burn on average 800 calories an hour if you work harder and are slightly heavier.

* While there is nothing to adjust from row to row on the WaterRower, it is possible to increase or decrease the level of resistance by changing how much water you put in the drum. The monitor is pre-calibrated to match 17 liters of water, but you can change that if you want. More than 17 liters = more resistance, up to the max fill line. This is not something you'll want to change frequently, it's more of a set-it-and-forget-it thing.
×