The WaterRower Club is handcrafted from solid Ash wood, finished with a black and rose stain and danish oil. The WaterRower's patented WaterFlywheel has been specifically designed to emulate the dynamics of a boat moving though water and is unsurpassed in its simulation of the physical and physiological benefits of rowing. WaterRower will not provide support or documentation for any product transported outside of the original country of purchase
Outside of resistance type, we found the number-one arbiter of ride feel to be cord quality. Water ergometers tend to employ nylon cords, while air ergometers feature metal chains — a durability factor we anticipated would result in our favoring air. But while all three water rowers aced our expectation of smooth, high-tension strokes, perfecting the chain seems to be more difficult: Some tug with just a slight rumble, others feature bouncy, grinding chains that are incredibly loud, something akin to angry snoring. As for nylon, the best wind and unwind like elastic silk — no slack, no sound, no catching, just perfectly even tension throughout the stroke.
Unlike its WaterRower Natural cousin, the WaterRower Club is designed for high-traffic areas, such as commercial gyms, studios, and rehabilitation clinics. Its dual black rails have been styled to prevent scuffing, while the other wood components are finished in an attractive rosewood, which is more resistant to soiling than the Natural model. Other details include four corner wheels on the rails that increase seat stability and reduce the amount of sweat buildup; a frame that flips upright for handy storage; and a weight capacity of up to 1,000 pounds. The WaterRower Club measures 84 by 21 by 22 inches (W x H x D), weighs 117 pounds (with water), and carries a one-year warranty on the frame and components (WaterRower will upgrade the warranty to five years on the frame and three years on the components with the completion of a registration form).
The Challenge AR has the capability to allow the rower to control and adjust the resistance from “Feather light” to “Olympic sprint” delivering a silky smooth resistance to the user’s effort and instantaneous response to input with no “flat sport”.  With water resistance being the most accurate manner in which to simulate actual outdoor rowing, the Challenge AR provides a smooth and consistent sensation throughout the range of motion of the exercise experience.  
If the machine is to be housed on a wooden floor you will need a mat beneath to reduce vibration and also noise. If space is tight, the hydraulic options are usually the smallest. It's also worth checking your floor can take the weight if you're going for one of the bigger, heavier models. For most, this shouldn't be a problem, if you have any doubts get a surveyor to check as it could be a very expensive mistake!

There is much to love about the WaterRower--and I do love it--but I would echo others' comments that although the seat rolls solidly and smoothly on the wood rails, the seat itself is very hard (I use a gel seat pad I bought for my hard fiberglass kayak seat), and the footpads are in need up rethinking and upgrading--the cheap plastic doesn't let you row in socks or barefoot and is not really worthy of a machine that is otherwise a stunning piece of engineering and a beautiful one as well. As one other person noted about his machine, my machine made a clicking noise on the return stroke, so I had to adjust the wheel underneath the top rail that connects to the footpad and pull it away gently from where it was rubbing against another component. Also, be warned: the instruction booklet is in the DVD case. I did not see the little sticker on the case telling me that, thinking I'd wait to watch the DVD until after I'd assembled it. But WaterRower has a copy of the assembly instructions on their website, along with a video (I found the written ones better and easier to follow), so I was able to assemble it with no difficulty.
SquareTrade Protection Plans are only valid for new or Amazon certified refurbished products purchased at Amazon in the last 30 days. By purchasing this Protection Plan you agree to the Protection Plan Terms & Conditions (http://www.squaretrade.com/terms-standard). Your Protection Plan Terms & Conditions will be delivered via email within 24 hours of purchase
As I mentioned, the rowing experience with the WaterRower is amazing. I bought the rower for myself, but my wife was curious and decided to try it out. She loves it, and now rows almost daily. We have a treadmill that neither of us has used since we started rowing - the WaterRower is a much better workout and much more enjoyable at the same time. It's easy to adjust the intensity, pace and duration of your exercise. There is nothing to change on the rower (* see note below), you just row harder or faster, adjust how far you lean forward and back during your stroke. The WaterRower will keep up with you as your fitness increases, all you need to do is keep throwing more and more at it.

As far as “racing”, I said an air rowing machine is better because the Concept2 is the only model used for indoor rowing competitions, setting world records, and entering your actual scores online. It is because their monitor can calculate the drag factor of the flywheel in real time and accurately calculate distance and time. Small changes such as dust build up, air temperature, and humidity will not change the times between different machines because the drag factor is calculated every stroke.
Not a lot to complain about on the Classic rower, but when searching for drawbacks of this rowing machine, the S4 Monitor is the one thing that occasionally comes up.  It’s rather basic and it isn’t backlit. Regardless, the monitor has all necessary tracking and features for getting an excellent workout, and in normal lighting there is no problem reading the display.
Another negative point for me is the angle of the seat. Unlike the Concept2, it has a slight backward angle, which makes it easier to maintain good form at the end of the stroke. Given that the Waterrower has greater resistance at the catch, it puts more pressure on the lower back at this point making it uncomfortable for people like myself with lumbar spine problems.
Although some rowing machines are made of space-age, super-sweat-resistant metals, you still want to wipe off the equipment after a sweaty workout.  These machines are usually constructed with a lot of various materials and salty sweat can be very corrosive.  Keeping your rowing machine clean can go a long way toward extending its life, and its appearance.
Rowing machines were first used in Archaic Greece. Chabrias, an Athenian military general in 4th Century B.C., invented wooden rowing simulators for his inexperienced oarsmen. This enabled them to learn technique and timing before stepping foot on actual water crafts. And it must have worked — Chabrias successfully led numerous naval attacks against the Spartans.
Products listed as Out of Stock are currently not in stock at the store(s) being viewed. Note that in some instances, very limited inventory may be available in stores, but because of small quantities we are unable to reflect the availability online. Please remember to check back – if or when inventory is replenished and available, this will be reflected online.
After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
The WaterRower Xeno Müller Signature Edition rowing machine is handcrafted in solid ash and finished with honey oak stain for color. The WaterRower Xeno Müller Signature Edition has been specifically designed in collaboration with US Olympian and single scull record holder Xeno Müller. This special edition rower features a wider 17" handle and lower footrests for an increased range. Another special feature is Xeno\'s signature included on the rails of either side of the rower thus inspiring you to row like an Olympian!
The Challenge AR features an advanced computer monitor providing the rower with measurable performance output, an ergonomically designed seat that rides on precision bearings and rollers for absolute smoothness, an upgraded footboard with advanced heel support, and an innovative soft grip handle to eliminate stress on the hands and wrist during the comfortable, but physical workout.
This is a company known for quality as well as stewardship for over 20 years. WaterRower hand-crafts their rowing machines to be more than just a workout machine, but also a work of art as well. Also, WaterRower is and has been on the cutting edge of environmental sustainability with their use of the best hardwoods coming from renewable forests. We’re in excellent hands here.

Storage is also a plus point for the Waterrower series as they are all designed to stand upright with the tank acting as ballast for stability. In this position they only take up around two square feet. Again, great if you are planning on training in the living room. However, if you have small children, I would advise fixing the top to the wall with a hook and strap.


The Challenge AR features an advanced computer monitor providing the rower with measurable performance output, an ergonomically designed seat that rides on precision bearings and rollers for absolute smoothness, an upgraded footboard with advanced heel support, and an innovative soft grip handle to eliminate stress on the hands and wrist during the comfortable, but physical workout.
Chris Kinsey works as an editor for a medical publisher and has experience dealing with many topics, ranging from athlete's foot to cancer and brain injury. Kinsey has a great deal of freelance experience writing for sports and parenting magazines as well. Kinsey holds a Bachelor of Arts in communications from California University of Pennsylvania.

Another negative point for me is the angle of the seat. Unlike the Concept2, it has a slight backward angle, which makes it easier to maintain good form at the end of the stroke. Given that the Waterrower has greater resistance at the catch, it puts more pressure on the lower back at this point making it uncomfortable for people like myself with lumbar spine problems.

When feet are in position and you are seated, ensure you are sitting in a tall yet relaxed position. Try to feel as if you are sitting on your ‘sit’ or ischia bones and rock slightly forwards and backwards on these bones. Your body weight will move from the front to the back of the seat. Ensure you are sitting with a locked core, shoulders relaxed and head looking forwards.
Instead of air or hydraulic resistance, the Elite Wave Water Rowing Machine emulates actual rowing with lifelike water resistance. The paddles glide through the water housed in the reservoir, making the rowing stroke smooth from start to finish, and like rowing on a body of water, the resistance increases infinitely the faster you row. Not only does this feel like rowing on water, it sounds like water. Different stroke speeds and intensities vary water motion, resulting in realistic water resonance.
The rowing machine itself is unlike any other on the market with its patented water filled flywheel. It is hard to exactly copy the action of a scull on the water, but the mechanics of the flywheel spinning in water comes in a close second on dry land. The fact that the water is 800 times denser than air means that there is no need for any extra resistance or dampening that you will find in normal air rowers. The faster you pull, the more resistance is generated giving it infinite variability. However, if you want to be able to practice rowing with a faster stroke, you will have to reduce the amount of water in the tank unlike an air rower where you just have to adjust the baffle.
The WaterRower Classic Rowing Machine is a work of art. But before you buy one just to hang it on the wall, the more important feature of course is that this rowing machine is a high-quality, durable, and effective piece of exercise equipment that will help you get in top fitness with ease and low-impact comfort. With a user weight capacity of 1,000 lbs, WaterRower has built the Classic Rowing Machine to take everything you can throw at it. No matter how intense your workouts are, you’re not going to hurt this machine. And it accommodates everyone from beginner rowers to experienced die-hards.
×