Most of the Waterrower range is made of wood harvested from the sustainably managed Appalachian forests of the eastern United States. The machines are extremely well built and are beautiful to look at coming in Ash, Oak or Cherry wood. If you are concerned about having an exercise machine in a living area, then one of the wooden models will fit right in to your living room. They are also extremely quiet in operation due to the wooden construction and the use of a strap rather that a chain. The only thing you can really hear is the swishing sound of the water in the tank as you pull giving you the feeling that you are really on the river!
If the machine is to be housed on a wooden floor you will need a mat beneath to reduce vibration and also noise. If space is tight, the hydraulic options are usually the smallest. It's also worth checking your floor can take the weight if you're going for one of the bigger, heavier models. For most, this shouldn't be a problem, if you have any doubts get a surveyor to check as it could be a very expensive mistake!

John Duke, creator of the WaterRower, was inspired to try his hand at invention while working at a subsidiary for U.S. Steel. He wanted to make an indoor machine that felt as much like real rowing as possible, with a focus on aesthetics. It took him two years to get the design right, moving past failed ideas such as a flipper in the tank instead of a clutch. What began as a series of doodles at his desk turned into a sculptural piece of exercise equipment that upends expectations in two ways: by bringing water indoors, and by looking elegant and artful when stored.
The advantages with air rowers is that there is smooth action; there is only small wear and tear to its mechanism; its automatic feature adjusts according to your rate of strokes; and there is a wide range of the resistance readily available in replicating the feel of rowing through the waters. The only disadvantage of this machine is that it tends to be noise indoors.

Essentially, the water rower uses water as it's resistance and the air rower (click here to read our air rowing machine reviews) uses air resistance. Additionally, the resistance of the water gives a very similar feeling to actually rowing in the water. The rowing machines listed above all have fantastic rowing mechanisms that mimic the exact feeling of a rowing a boat.
As far as “racing”, I said an air rowing machine is better because the Concept2 is the only model used for indoor rowing competitions, setting world records, and entering your actual scores online. It is because their monitor can calculate the drag factor of the flywheel in real time and accurately calculate distance and time. Small changes such as dust build up, air temperature, and humidity will not change the times between different machines because the drag factor is calculated every stroke.
After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
Performance is meaningless if you can’t or don’t want to use the equipment, and that’s why the Wave Water rower was built for comfort and convenience. With a wide, molded seat to accommodate users of all sizes and a padded, textured rowing handle, you can build your strength and endurance in ease. When setting up the rower, the leveling endcaps with a dial ensure stability. After your workout, storing your Wave Water rower is easy – just fold the frame and roll the rower into a closet or corner.
Rowing machines were first used in Archaic Greece. Chabrias, an Athenian military general in 4th Century B.C., invented wooden rowing simulators for his inexperienced oarsmen. This enabled them to learn technique and timing before stepping foot on actual water crafts. And it must have worked — Chabrias successfully led numerous naval attacks against the Spartans.
This piece of finely tuned, hand-crafted, water-resistance workout equipment also sits at the top end of the rowing machine spectrum. Employing a water flywheel that helps to mimic the feel of rowing in actual water, the natural wood WaterRower Rowing Machine will bring you a smooth, yet challenging workout that is as tough as you want it to be. If rowing is one of the best exercises you can do for your body as far as natural motion with low to no-impact, then the WaterRower is one of the best machines to do it on.

Reviews.com has an advertising relationship with some of the offers included on this page. However, the rankings and listings of our reviews, tools and all other content are based on objective analysis. For more information, please check out our full Advertiser Disclosure. Reviews.com strives to keep its information accurate and up to date. The information in our reviews could be different from what you find when visiting a financial institution, service provider or a specific product’s website. All products are presented without warranty.
Here’s a secret, because the rowing machine provides an intense full body workout, the exercise burns a high amount of calories not only during the actual activity but also for a period after you’ve stopped. This is known as the “after-burn effect”. Essentially, you’ve worked your body so hard that it is forced to keep burning calories and fat even when you’re not rowing. The scientific jargon for this is “excess post-exercise oxygen consumption” or “EPOC” for short. But all you need to know is that if you’re doing an intense rowing workout, the benefits continue after you’re done. How great is that?
A 125-pound person moving at an average pace for 30 minutes on a treadmill will burn roughly 250 calories. However, they aren’t able to take advantage of this after-burn effect. The same person rowing vigorously will burn around to 250 calories but will have less stress placed upon their joints and continue to burn calories after the workout has ended. Rowing machines have been shown to burn on average 800 calories an hour if you work harder and are slightly heavier.

No matter the resistance we set or the power we applied, the machine remains sturdy, centered, and even. We amped up the intensity for 2000m sprints and found that the C2 supports consistent effort in a way water resistance can’t. The machine assists in keeping your intensity uniform, because it stores up remaining energy in the spinning flywheel. Comments about the ride feel of both Concept 2s were noticeably brief. As one tester put it, “It’s unremarkable because it’s good,” and leaves you free to focus on the effort you’re putting into your workout.
Another negative point for me is the angle of the seat. Unlike the Concept2, it has a slight backward angle, which makes it easier to maintain good form at the end of the stroke. Given that the Waterrower has greater resistance at the catch, it puts more pressure on the lower back at this point making it uncomfortable for people like myself with lumbar spine problems.

Rowing machines were first used in Archaic Greece. Chabrias, an Athenian military general in 4th Century B.C., invented wooden rowing simulators for his inexperienced oarsmen. This enabled them to learn technique and timing before stepping foot on actual water crafts. And it must have worked — Chabrias successfully led numerous naval attacks against the Spartans.


This elegant rowing machine builds strength and stamina by closely simulating a real world rowing experience. Its patented Waterflywheel, which moves through actual water, provides a smooth stroke that exercises 84% of your muscle mass evenly and prevents injuries. When not in use, the WaterRower can be stored vertically against a wall. Made in the USA from ethically sourced walnut wood. Assembly required.
The Challenge AR has the capability to allow the rower to control and adjust the resistance from “Feather light” to “Olympic sprint” delivering a silky smooth resistance to the user’s effort and instantaneous response to input with no “flat sport”.  With water resistance being the most accurate manner in which to simulate actual outdoor rowing, the Challenge AR provides a smooth and consistent sensation throughout the range of motion of the exercise experience.  

When a product is listed as Pre-Order, such product is not yet in stock but is available for advanced purchase on our site, prior to the manufacturer's public release date. Pre-Order items are shipped once in stock and the public release date arrives. You will be notified of a product's updated status by email. The expected shipment time is listed on the Product Detail page.
The WaterRower Classic is handcrafted in solid American black walnut, which may vary in color from rich brown to purple/black. The black walnut was chosen due to its marvelous engineering properties, especially its ability to absorb sound and vibration, which enhances the WaterRower's quiet performance and smooth operation. Black walnut, like all woods used in the construction of the WaterRower, is a premium hardwood with incredible longevity and dimensional stability. In addition, the wood is harvested from replenishable forests and is hand finished with three coats of Danish oil to give it a deep luster and warmth.
×